A Circular Bioeconomy Approach to Using Post-Bioadsorbent Materials Intended for the Removal of Domestic Wastewater Contaminants as Potential Reinforcements

Cristina E. Almeida-Naranjo,Alex Darío Aguilar,Vladimir Valle,Carlos Bastidas-Caldes,Alexis Debut,Britanny Sinchiguano

DOI: https://doi.org/10.3390/polym16131822

IF: 5

2024-06-28

Polymers

Abstract:Agro-industrial residue valorization under the umbrella of the circular bioeconomy (CBE) has prompted the search for further forward-thinking alternatives that encourage the mitigation of the industry's environmental footprint. From this perspective, second-life valorization (viz., thermoplastic composites) has been explored for agro-industrial waste (viz., oil palm empty fruit bunch fibers, OPEFBFs) that has already been used previously in other circular applications (viz., the removal of domestic wastewater contaminants). Particularly, this ongoing study evaluated the performance of raw residues (R-OPEFBFs) within three different size ranges (250–425, 425–600, 600–800 μm) both before and after their utilization in biofiltration processes (as post-adsorbents, P-OPEFBFs) to reinforce a polymer matrix of acrylic resin. The research examined the changes in R-OPEFBF composition and morphology caused by microorganisms in the biofilters and their impact on the mechanical properties of the composites. Smaller R-OPEFBFs (250–425 μm) demonstrated superior mechanical performance. Additionally, the composites with P-OPEFBFs displayed significant enhancements in their mechanical properties (3.9–40.3%) compared to those with R-OPEFBFs. The combination of the three fiber sizes improved the mechanical behavior of the composites, indicating the potential for both R-OPEFBFs and P-OPEFBFs as reinforcement materials in composite applications.

polymer science

What problem does this paper attempt to address?

This paper discusses the potential reuse of biomass adsorbents (such as oil palm empty fruit bunch fibers, OPEFBFs) used for removing household wastewater pollutants as potential reinforcement materials within the Circular Bioeconomy (CBE) framework. The authors evaluated the mechanical properties of untreated (R-OPEFBFs) and biofiltered (P-OPEFBFs) oil palm empty fruit bunch fibers within different size ranges and used them as reinforcements for acrylic resin-based composite materials. The study found that smaller-sized R-OPEFBFs exhibited better mechanical properties, while the used P-OPEFBFs as reinforcements significantly improved the mechanical properties of the composite materials (increasing by 3.9%-40.3%). Additionally, combining fibers of different sizes improved the mechanical behavior of the composite materials, indicating the potential of both R-OPEFBFs and P-OPEFBFs in composite material applications. The paper also highlighted the influence of microorganisms on the fibers during the biofiltering process, such as altering their composition and morphology. These changes may benefit the performance enhancement of the composite materials. Although previous research has focused on the application of natural fibers in polymer composites, there is limited research on the reuse of post-biomass materials. This study aims to fill this gap by integrating biofiltered materials into composite materials, not only addressing sustainable waste management but also potentially reducing processing costs while ensuring no release of pollutants.

A Circular Bioeconomy Approach to Using Post-Bioadsorbent Materials Intended for the Removal of Domestic Wastewater Contaminants as Potential Reinforcements

Recycling of biodegradable biobased polymer/agave fiber biocomposites

Mechanical recycling of biobased polyethylene-agave fiber composites

Designing of carbon fiber-reinforced polymer (CFRP) composites for a second-life in the aeronautic industry: strategies towards a more sustainable future

Preparation and characterization of a sustainable foamed biocomposite from compatibilized recycled polyethylene and agave fiber

Biopolymer composites based on ultrasound/plasma‐modified fiber waste and polybutylene adipate terephthalate (PBAT): Physicochemical and functional performance

Promoting the circular economy: Valorization of a residue from industrial char to activated carbon with potential environmental applications as adsorbents

From food waste to eco-friendly functionalized polymer composites: investigation of orange peels as active filler

A viable strategy to recycle post-used carbon fiber thermoset composites as a multi-functional filler for PP composites

Valorization and biorefinery of local agricultural and textile wastes through mycelium composites for structural applications

A simple, efficient and selective catalyst for closed-loop recycling of PEF in situ towards a circular material economy approach

Can Industry Counteract the Ecological Crisis? An Approach for the Development of a New Circular Bioeconomic Model Based on Biocomposite Materials

Sustainable Composites Containing Post-Production Wood Waste as a Key Element of the Circular Economy: Processing and Physicochemical Properties

Life Cycle Assessment of Olive Pomace as a Reinforcement in Polypropylene and Polyethylene Biocomposite Materials: A New Perspective for the Valorization of This Agricultural By-Product

Valorisation of waste pulp from materials recovery facility rejects for composite applications

Improving process sustainability in bio-oil transforming for biofuels and platform chemicals production: Valorization of the carbon residue

Enhanced Biodegradation Rate of Poly(butylene adipate-co-terephthalate) Composites Using Reed Fiber

Chemical recycling of green poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)-based air filters through hydrolysis

Efficacy of bacterial cellulose hydrogel in microfiber removal from contaminated waters: A sustainable approach to wastewater treatment

Composite Recycling with Biocatalytic Thermoset Reforming

Revalorization of Yerba Mate Residues: Biopolymers-Based Films of Dual Wettability as Potential Mulching Materials