Abstract:Titanium carbo-nitride coatings were deposited using plasma-assisted physical vapour deposition technique on Al-7075 aluminium alloy plates. Studies were conducted to understand the bonding between the coating and substrate, and to examine the wear- and corrosion-resistant properties under heat treatments. The nature of bonding was characterized using scanning electron microscope. The pin-on-disc wear test, according to G99 ASTM standard, displayed the frictional force, coefficient of friction and wear for the samples. Simultaneously, the corrosion tests, according to G5-14 ASTM standard, performed for a period of 48 h, using electrochemical impedance and potentiodynamic polarization tests displayed the Nyquist and Tafel plots for analysis. The wear and corrosion rates of samples heat-treated at \(500^{\circ }\hbox {C}\) for 1 h were found to be \(0.066\hbox {e-}6\,\hbox {g\,s}^{{-1}}\) and \(2.962\hbox {e}2\,\hbox {g mm}^{-2}\,\hbox {s}^{{-1}}\), respectively. While that of samples heat-treated at \(500^{\circ }\hbox {C}\) for 12 h were found to be \(0.366\hbox {e-}6\,\hbox {g s}^{{-1}}\) and \(4.177\hbox {e}2\,\hbox {g mm}^{-2}\,\hbox {s}^{{-1}}\). Both the wear and the corrosion performance investigations were in good agreement with each other. Thus, the tribo-corrosive deterioration of titanium carbo-nitride coated Al-7075 had escalated with an increase in durations of the heat treatment.

Effect of hydrogen embrittlement on the tribo-mechanical properties of TiN coated aluminium alloys

Hydrogen Induced Hardening and Embrittlement of Vanadium Alloys

Wear properties of nonhydrogenated, hydrogenated, and dehydrogenated Ti6Al4V alloy

Effect of PVD deposition method on indentation and friction wear characteristics with hydrogen embrittlement of CrN coated stainless steel for electric vehicle hydrogen valves

Hydrogen-Induced Wear of Ti–6Al–4V Alloy

Effects of Hydrogen on the Mechanical Properties of Ti–Al–Zr Alloy

Microstructural response and wear behaviour of Ti-6Al-4V impregnated with Ni/Al2O3 + TiO2 nanostructured coating using an electric arc

Deciphering Hydrogen Embrittlement Mechanisms in Ti6Al4V Alloy: Role of Solute Hydrogen and Hydride Phase

Investigation on the Microstructures and Hydrogen Embrittlement Mechanism of Hydrogenated Ti6al4v

Effect of Strain Rate on Hydrogen Embrittlement of Ti6Al4V Alloy

Effect of hydrogen charging on the wear resistance of CrN-coated Al alloy for hydrogen valve of fuel cell electric vehicles

Hydrogen Embrittlement of A Ti-Al-Zr Alloy Evaluated by Impact Test Method

Wear and corrosion resistance of titanium carbo-nitride coated Al-7075 produced through PVD

The Effect of TiN, TiAlN, TiCN Thin Films Obtained by Reactive Magnetron Sputtering Method on the Wear Behavior of Ti6Al4V Alloy: A Comparative Study

Tribological Behaviors of Electroless Nickel-Boron Coating on Titanium Alloy Surface

Influence of Al/Ti Atomic Ratio on Hard Al–TiCN Films

Wear performance of Ti-6Al-4 V titanium alloy through nano-doped lubricants

Fatigue Crack Growth of Electron Beam Melted Ti-6Al-4V in High-Pressure Hydrogen

Hydrogen Isotope Permeation Behavior of AlCrFeTiNb, AlCrMoNbZr and AlCrFeMoTi High-Entropy Alloys Coatings

Microstructure and Tribocorrosion Properties of NiTi/AlNi2Ti Ternary Intermetallic Alloy

Effects Of Wear Conditions On Tribological Properties Of Tib2-Tic/Ni Composite Coating By Plasma Cladding