Abstract:A comprehensive analytical model for predicting the long-term durability of polymers and polymer matrix composites should in general take into account polymer viscoelastic/viscoplastic creep, hygrothermal effects, and the effects of physical and chemical ageing on material response. These effects, in turn are influenced by a multitude of factors such as polymer morphology, service temperature, ambient relative humidity, internal moisture concentrations, stacking sequence, fibre volume fraction, fibre architecture, applied stress level, degree of damage and ageing time. The primary objective of this paper is to present a multi-scale modelling methodology to simulate the long-term interlaminar properties in polymer matrix woven composites and then predict the critical regions where failure is most likely to occur. A micro-mechanics approach towards modelling the out-of-plane viscoelastic behaviour of a five-harness satin woven-fibre cross-ply composite laminate is presented, taking into consideration the weave architecture and time-dependent effects. In-plane properties are assumed to be dominated by the carbon fibres and are hence deemed elastic. The classical lamination theory model proposed by Raju and Wang is adapted to include the in-plane elastic behaviour of woven fibre composites. For the matrixdominated out-of-plane response, a viscoelastic creep model is employed to model the resin, based on Schapery's nonlinear viscoelastic constitutive law. In addition, physical ageing of the matrix has been included in the model, using the effective time theory proposed by Struik. Furthermore, the effect of large deflections and rotations on the time dependent out-of-plane behaviour is also investigated using the micro-mechanics model. The homogenized in-plane and out-of-plane compliance obtained using the proposed micro-mechanics methodology could be applied within the framework of a structural finite element code to model the macro-scale long-term behaviour of a woven fabric composite structure.

Long-term life prediction of wearable CFRP lower limb exoskeleton suit by applying a multi-scale FEA and time-temperature superposition

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

A Methodology to Predict the Fatigue Life under Multi-Axial Loading of Carbon Fiber-Reinforced Polymer Composites Considering Anisotropic Mechanical Behavior

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

A Robust Life Prediction Model for a Range of Materials under Creep-Fatigue Interaction Loading Conditions

Prediction of creep failure life for unidirectional CFRP with heat-resistant epoxy resin as matrix exposed to high temperature under tension load

Long-term Fatigue Strength Prediction of CFRP Structure Based on Micromechanics of Failure

Multiscale fatigue life prediction model for CFRP laminates considering the mechanical degradation of its constituents and the local stress concentration of the matrix

Modeling the residual strength and fatigue life of carbon fiber composites under constant amplitude loading

Mechanical performance evolution and life prediction of prestressed CFRP plate exposed to hygrothermal and freeze-thaw environments

Numerical Simulation for Durability of a Viscoelastic Polymer Material Subjected to Variable Loadings Fatigue Based on Entropy Damage Criterion

Determination of shift factor for long-term life prediction of carbon/fiber epoxy composites using the time-temperature superposition principle

Fatigue performance test of exoskeleton leg component based on composite materials

The Aging Behavior and Life Prediction of CFRP Rods under a Hygrothermal Environment

Fast and synergetic fatigue life prediction of short fiber reinforced polymer composites from monotonic and cyclic loading behavior

Fatigue Life Prediction for Injection-Molded Carbon Fiber-Reinforced Polyamide-6 Considering Anisotropy and Temperature Effects

Lifespan prediction of glass fiber reinforced polymers subjected to flexural creep and elevated temperatures using analytical and numerical analyses

Mechanical Property Evolution and Life Prediction of Carbon Fiber and Pultruded Carbon Fiber Reinforced Polymer Plate Exposed to Elevated Temperatures

An Efficient Life Prediction Methodology For Low Cycle Fatigue-Creep Based On Ductility Exhaustion Theory

Evaluate the Fatigue Life of CFRC Subjected to Coupled Thermo–Mechanical Loading