Abstract:In order to get a better hygrothermal stress and failure prediction for CFRP laminate, an RVE model was established. Wet and thermal stress were coupled using a sequential method. Macroscopic and microscopic subroutines were developed to calculate the stress–strain field of CFRP laminate and RVE model. A multiscale numerical simulation of three‐point bending of moisture‐saturated CFRP laminate was conducted. A mesoscopic representative volume element (RVE) model of carbon fiber reinforced polymers (CFRP) laminate with 15 plies was established based on the principle of fiber random disturbance. The RVE model was validated by comparing the elastic parameters calculated by the RVE model, Chamis model, and Bridge model. Wet stress and thermal stress were coupled using a sequential method. Macroscopic and microscopic subroutines were developed to calculate the stress–strain field of CFRP laminate and RVE model. A multiscale numerical simulation of three‐point bending of moisture‐saturated CFRP laminate was conducted. Failure process and failure modes of CFRP laminate were discussed based on the multiscale simulation and SEM observations. The results show that the RVE model and the multiscale simulation strategy presented in this work can predict the coupled hygrothermal stress and the strength degradation due to moisture absorption very well. The maximum error between the simulated and experimental averaged force of the moisture‐saturated CFRP laminate subjected to three‐point bending is about 3.4%. Multiscale simulation demonstrated that uneven distribution of fibers can result in the fiber/matrix interfaces bearing a larger transverse stress in the fiber's dense distribution area. It is the main reason that results in fiber/matrix interface failure of CFRP laminates working in hygrothermal environments. Highlights A RVE model of CFRP laminate was presented using fibers random disturbance. Coupled hygrothermal stress of single fiber and surrounded matrix was obtained. A multiscale simulation of the strength change of the CFRP plate due to wet‐thermal stress was conducted. Failure modes of CFRP laminate are discussed based on the multiscale simulation.

Multiscale fatigue life prediction model for CFRP laminates considering the mechanical degradation of its constituents and the local stress concentration of the matrix

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

A Methodology to Predict the Fatigue Life under Multi-Axial Loading of Carbon Fiber-Reinforced Polymer Composites Considering Anisotropic Mechanical Behavior

Strength and stiffness degradation modeling and fatigue life prediction of composite materials based on a unified fatigue damage model

Multiscale-based multiaxial fatigue model of short fiber reinforced polymer composites under high-cycle proportional loading

A Fatigue Model to Predict Interlaminar Damage of FRP Composite Laminates Subjected to Mode I Load

Multiscale simulation of hygrothermal stress and mechanical properties degradation of carbon fiber reinforced polymers laminates

Progressive Fatigue Modelling of Open-Hole Glass-Fibre Epoxy Laminates

Effect of Stress Ratio and Loading Inclination on the Fatigue Life of Carbon-Fiber-Reinforced Polymer Composites: Multiscale Analysis Approach

Fatigue-driven failure criterion for progressive damage modelling and fatigue life prediction of composite structures

Fatigue Life Prediction of Composite Laminate Based on Stress of Fiber and Matrix of UD Composite

Fatigue failure mechanism analysis and life prediction of short fiber reinforced polymer composites under tension-tension loading

Fatigue life prediction method of carbon fiber-reinforced composites

Fuzzy fatigue life prediction of fiber-reinforced laminated composites by continuum damage mechanics

Modeling of progressive high-cycle fatigue in composite laminates accounting for local stress ratios

Evaluation and Modeling of the Fatigue Damage Behavior of Polymer Composites at Reversed Cyclic Loading

Simulation of Fatigue Process in FRP Laminates with Local Stress Concentration

Novel 2D strain-rate-dependent lamina-based and RVE/phase-based progressive fatigue damage criteria for randomly loaded multi-layer fiber-reinforced composites

Multiscale Progressive Failure Analysis for Composite Stringers Subjected to Compressive Load

A critical plane approach for multiaxial fatigue life prediction of short fiber reinforced thermoplastic composites