Abstract:The shape memory properties of thermoplastic polyurethane (TPU)/polycaprolactone (PCL) based blends were studied. In the literature, most two-way shape memory polymers under stress-free conditions were prepared using single polymer or copolymer networks, and rare studies focused on the simple elastomer/plastic blend systems, particularly on the solvent vapor-triggered cases. For the two-way shape memory effect (SME), the entropy-induced elongation was found to be quite significant, not just the crystallization-induced elongation for the developed blends under large external load. Regarding vapor-triggered TPU/PCL blends (polar/polar blends) exposed to THF and n-hexane, the selected TPU showed a slightly better affinity to THF than PCL resins. However, both resins exhibited fewer affinities to n-hexane. Interestingly, the bent TPU sample expanded first, instead of shrinking, on exposing THF vapor. Unfortunately, the reversible behavior was not perceived after exposure to the air. However, with the addition of PCL, most TPU/PCL blends remarkably demonstrated the reversible shrinking/expanding behavior on exposure to the THF/air environment. This observation can't be explained by the simple gradient swelling/crystallization mechanism described in the literature. In overviewing our previous blends with different combinations in polarity on exposing the selective vapors, we propose a competing swelling/internal stress mechanism, that the dominant forces between solvent expansion/shrinkage through the (gradient) swelling effect and solvent-induced contraction/drying-induced elongation through the internal stress effect in the typical two-way shape memory behavior played an important role. To the best of our knowledge, this is the first study to comprehensively outline the possible competing factors to justify this interesting contrast in their solvent vapor-triggered reversible shape memory behavior for those blends. This simple blending method reveals numerous potentials to prepare multi-triggered two-way shape memory polymer blends.

Multiaxial shape memory effect of thermo-induced shape memory polyurethane under proportional tension-torsion loading

Experimental Investigation on the Cyclic Shape Memory Effect of Thermo-Induced Shape Memory Polyurethane Under Multiaxial Pre-Deformations

Mechanisms of Multi-Shape Memory Effects and Associated Energy Release in Shape Memory Polymers

A Molecular Dynamics Investigation of the Deformation Mechanism and Shape Memory Effect of Epoxy Shape Memory Polymers

Influence of Thermoviscoelastic Properties and Loading Conditions on the Recovery Performance of Shape Memory Polymers

A Predictive Parameter for the Shape Memory Behavior of Thermoplastic Polymers

Multiple relaxation mechanism-based thermo-mechanical constitutive model describing cyclic shape memory effect of shape memory polyurethane

Modeling the Thermo-Mechanical Behavior and Constrained Recovery Performance of Cold-Programmed Amorphous Shape-Memory Polymers

Significant Impact of Thermo-Mechanical Conditions on Polymer Triple-Shape Memory Effect

One-way Shape Memory Behavior of Thermoplastic Polyolefin Elastomers

Thermo-mechanical deformation for thermo-induced shape memory polymers at equilibrium and non-equilibrium temperatures: Experiment and simulation

Heating‐Responsive Shape‐Memory Effect in Thermoplastic Polyurethanes with Low Melt‐Flow Index

An Experimental Study of the Superelastic Behavior in NiTi Shape Memory Alloys under Biaxial Proportional and Non-Proportional Cyclic Loadings

In Situ Observation on Rate-Dependent Strain Localization of Thermo-Induced Shape Memory Polyurethane

A Mechanism-Based Four-Chain Constitutive Model for Enthalpy-Driven Thermoset Shape Memory Polymers With Finite Deformation

A novel multi-triggered reversible shape memory thermoplastic polyurethane (TPU)/polycaprolactone (PCL) blend

Evaluation of the thermomechanical Shape memory polymers in equi-biaxial condition by hydraulic bulge test

Finite strain constitutive modeling for shape memory alloys considering transformation-induced plasticity and two-way shape memory effect

Thermomechanical coupling in cyclic phase transition of shape memory material under periodic stressing—experiment and modeling

Tuning the dual- and triple-shape-memory effect of thermoplastic polyurethane/polylactic acid/poly(propylene carbonate) ternary blends via morphology control

Synthesis and properties of temperature-responsive Shape Memory Polyurethane with secondary crosslinked network structure based on LPO