Abstract:The shape memory properties of thermoplastic polyurethane (TPU)/polycaprolactone (PCL) based blends were studied. In the literature, most two-way shape memory polymers under stress-free conditions were prepared using single polymer or copolymer networks, and rare studies focused on the simple elastomer/plastic blend systems, particularly on the solvent vapor-triggered cases. For the two-way shape memory effect (SME), the entropy-induced elongation was found to be quite significant, not just the crystallization-induced elongation for the developed blends under large external load. Regarding vapor-triggered TPU/PCL blends (polar/polar blends) exposed to THF and n-hexane, the selected TPU showed a slightly better affinity to THF than PCL resins. However, both resins exhibited fewer affinities to n-hexane. Interestingly, the bent TPU sample expanded first, instead of shrinking, on exposing THF vapor. Unfortunately, the reversible behavior was not perceived after exposure to the air. However, with the addition of PCL, most TPU/PCL blends remarkably demonstrated the reversible shrinking/expanding behavior on exposure to the THF/air environment. This observation can't be explained by the simple gradient swelling/crystallization mechanism described in the literature. In overviewing our previous blends with different combinations in polarity on exposing the selective vapors, we propose a competing swelling/internal stress mechanism, that the dominant forces between solvent expansion/shrinkage through the (gradient) swelling effect and solvent-induced contraction/drying-induced elongation through the internal stress effect in the typical two-way shape memory behavior played an important role. To the best of our knowledge, this is the first study to comprehensively outline the possible competing factors to justify this interesting contrast in their solvent vapor-triggered reversible shape memory behavior for those blends. This simple blending method reveals numerous potentials to prepare multi-triggered two-way shape memory polymer blends.

Heating‐Responsive Shape‐Memory Effect in Thermoplastic Polyurethanes with Low Melt‐Flow Index

One-way Shape Memory Behavior of Thermoplastic Polyolefin Elastomers

Viscoelastic Property Evolution of Thermoplastic Polyurethane During Annealing Treatment and Its Correlation with Segmental Crystallization

A Predictive Parameter for the Shape Memory Behavior of Thermoplastic Polymers

Controllable Shape‐memory Recovery Regions in Polymers Through Mechanical Programming

Mechanisms of Multi-Shape Memory Effects and Associated Energy Release in Shape Memory Polymers

A Molecular Dynamics Investigation of the Deformation Mechanism and Shape Memory Effect of Epoxy Shape Memory Polymers

Tunable Shape-Memory Behaviors in Amorphous Polymers Through Bound Solvent

Omnidirectional Shape Memory Effect Via Lyophilization of Peg Hydrogels

A novel multi-triggered reversible shape memory thermoplastic polyurethane (TPU)/polycaprolactone (PCL) blend

Effects of soft segment molecular weight on the properties of recyclable polyurethanes with low‐temperature multiple shape memory

Experimental Investigation on the Cyclic Shape Memory Effect of Thermo-Induced Shape Memory Polyurethane Under Multiaxial Pre-Deformations

Solvent-Free One-Shot Synthesis of Thermoplastic Polyurethane Based on Bio-Poly(1,3-propylene succinate) Glycol with Temperature-Sensitive Shape Memory Behavior

Multiple relaxation mechanism-based thermo-mechanical constitutive model describing cyclic shape memory effect of shape memory polyurethane

Understanding the shape-memory mechanism of thermoplastic polyurethane by investigating the phase-separated morphology: A dissipative particle dynamics study

Thermo-mechanical deformation for thermo-induced shape memory polymers at equilibrium and non-equilibrium temperatures: Experiment and simulation

Unraveling the impact of phase separation induced by thermal annealing on shape memory effect of polyester‐based thermoplastic polyurethane

Fabrication of Novel Thermoplastic Vulcanizates Based on Ethylene-Vinyl Acetate Copolymer/Chloroprene Rubber with Heat-Triggered Shape Memory Behavior

A heat initiated 3D shape recovery and biodegradable thermoplastic tolerating a strain of 5

Temperature-induced Evolution of Micro-structure and Chain Dynamics in Thermoplastic Polyurethane with Low Hard Segment Content as Studied by In Situ Synchrotron SAXS and Time-Domain NMR Experiments

The morphology, properties, and shape memory behavior of polylactic acid/thermoplastic polyurethane blends