Abstract:This paper presents an event-triggered model predictive control (MPC) strategy with learning terminal cost for robotic manipulators containing model uncertainty and input constraints. In the proposed MPC structure, an adaptive predictive model for the robotic system is established by radial basis function neural networks (RBFNNs) firstly. Then, a terminal cost adjusted by the global learning mechanism is constructed. Both global steady-state optimization and transient fast convergence are achieved by adding the learning terminal cost to the MPC scheme. After that, a triggering condition of the MPC solving is developed based on the predictive model’s weights and the predictive tracking error. Besides, the condition to avoid Zeno behavior is obtained. The recursive feasibility of the proposed MPC strategy is verified, and the ultimately uniformly boundedness (UUB) of all variables is proved according to the Lyapunov theorem. Finally, experiments based on an xMate7 Pro robot are conducted to demonstrate the effectiveness of the presented method. Note to Practitioners—The tracking control of robotic manipulators is a common and important problem in industrial applications, such as grasping, loading, unloading, et al. There exist some limitations in existing control methods. For example, general control strategies such as adaptive control, sliding mode control neglect the balance between control costs and expected performance; existing optimal control approaches rarely consider global steady-state optimization and transient fast convergence under the influence of model uncertainty. This paper is motivated by these limitations of robotic control design and inspired by model predictive control and optimal control theory. It develops a novel strategy for tracking control of robotic manipulators, which includes three following items: (1) adopt an approximation model constructed by neural networks as the predictive model for estimating the robotic system; (2) introduce a critic network into the terminal cost of the objective function of MPC for learning global optimal solution; (3) establish an event-triggered mechanism for solving of the optimization problem. The proposed method is verified by experimental results. In our future work, the proposed control strategy will be applied to more industrial processes.

Robust Precision Position Tracking of Planar Motors Using Min-Max Model Predictive Control

A novel robust tuning strategy for model predictive control

Off-line Robust Model Predictive Control of Set-point Positioning for Planar Switched Reluctance Motors

Fast and Accurate Motion Tracking of a Linear Motor System under Kinematic and Dynamic Constraints: an Integrated Planning and Control Approach

Input-Constrained-Nonlinear-Dynamic-Model-Based Predictive Position Control of Planar Motors.

Integrated Robust Tracking Controller Design for a Developed Precision Planar Motor with Equivalent Disturbances

Online Optimization-Based Time-Optimal Adaptive Robust Control of Linear Motors with Input and State Constraints

A Systematic Min–Max Optimization Design of Constrained Model Predictive Tracking Control for Industrial Processes Against Uncertainty

A novel motor controller based on model predictive control

Path Tracking and Direct Yaw Moment Coordinated Control Based on Robust MPC With the Finite Time Horizon for Autonomous Independent-Drive Vehicles

Neural-network-based Adaptive Robust Precision Motion Control of Linear Motors with Asymptotic Tracking Performance

An efficient Min/Max Robust Model Predictive Control for nonlinear discrete-time systems with dynamic disturbance

A practical robust bounded control of permanent magnet synchronous motors with inequality constraints

A Robust Tube-Based Smooth-MPC for Robot Manipulator Planning

Model-Predictive-Control-Based Path Tracking Controller of Autonomous Vehicle Considering Parametric Uncertainties and Velocity-Varying

Tracking of Uncertain Robotic Manipulators Using Event-Triggered Model Predictive Control With Learning Terminal Cost

Robust Stabilization of a Wheeled Mobile Robot Using Model Predictive Control Based on Neurodynamics Optimization

Mecanum Wheel AGV Trajectory Tracking Control Based on Efficient MPC Algorithm

Sliding mode observer-based model predictive tracking control for Mecanum-wheeled mobile robot

An Improved Kinematic Model Predictive Control for High-Speed Path Tracking of Autonomous Vehicles

Research for Nonlinear Model Predictive Controls to Laterally Control Unmanned Vehicle Trajectory Tracking