Abstract:Flow characteristics within entrance regions in microchannels are important due to their effect on heat and mass transfer. However, relevant research is limited and some conclusions are controversial. In order to reveal flow characteristics within entrance regions and to provide empiric correlation estimating hydrodynamic entrance length, experimental and numerical investigations were conducted in microchannels with square cross-sections. The inlet configuration was elaborately designed in a more common pattern for microdevices to diminish errors caused by separation flow near the inlet and fabrication faults so that conclusions which were more applicable to microchannels could be drawn. Three different microchannels with hydraulic diameters of 100 μm, 150 μm, and 200 μm were investigated with Reynolds (Re) number ranging from 0.5 to 50. For the experiment, deionized water was chosen as the working fluid and microscopic particle image velocimetry (micro-PIV) was adopted to record and analyze velocity profiles. For numerical simulation, the test-sections were modeled and incompressible laminar Navier–Stokes equations were solved with commercial software. Strong agreement was achieved between the experimental data and the simulated data. According to the results of both the experiments and the simulations, new correlations were proposed to estimate entrance length. Re numbers ranging from 12.5 to 15 was considered as the transition region where the relationship between entrance length and Re number converted. For the microchannels and the Reynolds number range investigated compared with correlations for conventional channels, noticeable deviation was observed for lower Re numbers (Re < 12.5) and strong agreement was found for higher Re numbers (Re > 15).

Microchannel Flow Measurement Using Micro Particle Image Velocimetry

Microchannel Flow Measurement Using Micro Particle Image Velocimetry

Measuring Flow Velocity Distribution in Microchannels Using Molecular Tracers

Microscopic Visualized Measurement for Water Flow Rate in Microchannel

Measurement System for Characterization of Gas-Liquid Two-Phase Flow in Micro-Channel

Flow and Heat Transfer Characteristics in a Microchannel with a Circular Synthetic Jet

Velocity Measurement of Flow in the Microchannel with Barriers Using Micro-PIV

Experimental and Numerical Research on the Flow in Microchannel with Barriers

SIMULATION AND MICRO-PIV RESEARCH ON CLASSICAL MICROCHANNEL FLOW

Experimental Analysis of Microchannel Entrance Length Characteristics Using Microparticle Image Velocimetry

Turbulent and transitional velocity measurements in a rectangular microchannel using microscopic particle image velocimetry

Measurements of Three-Dimensional Flow in Microchannel with Complex Shape by Micro-Digital-Holographic Particle-Tracking-Velocimetry

Direct Measurement Of The Particle-Induced Flow Structure In A Confined Microchannel

Microscopic velocity field measurements inside a regular porous medium adjacent to a low Reynolds number channel flow

PIV measurement of flow field in a trapezium-cross section micro-channel

Experimental and Numerical Investigations on the Flow Characteristics Within Hydrodynamic Entrance Regions in Microchannels.

Applications of micro-PIV technique in visualization of flow in microspace

Electro-osmosis-driven micro-channel flows: A comparative study of microscopic particle image velocimetry measurements and numerical simulations

Study On Characteristics Of Interface Between Multiple Laminar Streams And Application For Secondary Etching Inside Microchannels

Direct measurement of microscale flow structures induced by inertial focusing of single particle and particle trains in a confined microchannel