Abstract:The main purpose of this paper is to analyze the heat transfer mechanism of a new type of regenerator with a low temperature difference and low current resistance under oscillatory flow at room temperature. Taking the single tube of the regenerator as the research object, the exact analytical solution of the radial heat transfer characteristics of the regenerator is obtained by studying its analytical model. The factors affecting the heat transfer characteristics are analyzed, and then the regenerator is optimized to improve the performance and efficiency of the regenerator system. In this study, we systematically analyzed the radial heat transfer characteristics of a regenerator under isochoric process conditions. A closed-system physical model of the incompressible isochoric process under oscillating flow was established. Then, the radial analytical solutions of pressure fluctuation, fluid velocity, fluid-solid temperature, and heat were derived in the complex number field. Furthermore, the fluid velocity, fluid-solid coupling wall temperature, heat, and equivalent heat transfer coefficient were assessed. Furthermore, the influences of frequency, inner diameter R1 of the regenerator, and different working medium and materials on the above parameters were discussed. It was found that the analysis and evaluation of fluid velocity, fluid-structure coupling wall temperature, heat, and equivalent heat transfer coefficient are helpful in understanding the dynamic characteristics of radial heat transfer in a regenerator system. Through the study of radial heat transfer under oscillating flow, it was found that the working medium, frequency, inner diameter of the regenerator, and material quality of the regenerator are helpful for the design optimization of the regenerator. Furthermore, our investigations established that the variation law of wall fluid-solid coupling temperature amplitude could be divided into three parts: the unidirectional flow part; the low-frequency part, where the temperature amplitude falls rapidly with increasing frequency; and the high-frequency part, where the temperature amplitude increases with the frequency. In addition, the variation of radial heat transfer of the fluid-solid coupling surface is similar to the changes in the temperature amplitude. We also discovered that the equivalent heat transfer coefficient of the fluid-solid surface is related to thermal conductivity of the material. Specifically, larger thermal conductivity values result in greater equivalent heat transfer coefficients. Based on the research into the radial heat transfer characteristics, the new regenerator has great application potential in the Stirling air conditioning system at room temperature.

Characteristics and potential of a novel inclined-flow stirling regenerator constructed by sinusoidal corrugated channels

Characteristic analysis and performance investigation of a new inclined-flowsegmented miniature-channel regenerator

Study of oscillating flows through a novel constructal bifurcation Stirling regenerator

Characteristics of Steady and Oscillating Flows Through Regenerator

Constructal design of a circular micro-channel Stirling regenerator based on exergy destruction minimization

Working Mechanism and Characteristics of Gas Parcels in the Stirling Cycle

Numerical study on regenerative effectiveness of parallel-plate regenerator for Stirling engine

MEASUREMENTS OF UNSTEADY CONVECTIVE HEAT TRANSFER RATES WITHIN A STIRLING REGENERATOR MATRIX SUBJECTED TO OSCILLATORY FLOW

Analysis of a 1 Kw Organic Rankine Cycle Using a Scroll Expander for Engine Coolant and Exhaust Heat Recovery

Analysis of Fluid-Solid Coupling Radial Heat Transfer Characteristics in a Normal Hexagonal Bundle Regenerator under Oscillating Flow

A Third-Order Numerical Model and Transient Characterization of a Β-Type Stirling Engine

Heat transfer characteristics of enhanced cooling tube with a helical wire under oscillatory flow in Stirling engine

Flow and heat transfer characteristics of torsional tube cluster heater in a Stirling engine

Analytical solutions of heat storage and heat transfer performance of parallel‐plate regenerators in Stirling cycle

CFD simulation of a Stirling thermoacoustic engine with multilayer regenerator

Experimental Investigation on Heat Transfer and Combustion of a Stirling Engine Combustor Fueled by Reformed Gas and Diesel Fuel

Program design for regenerator of a Stirling cooler

Experimental Study on Heat Transfer of Oscillating Flow of A Tubular Stirling Engine Heater

Exergy Loss Analysis of the Regenerator in a Solar Stirling Engine

Heat Transfer Study of a Hybrid Smooth and Spirally Corrugated Tube

Varying the Cross-Sectional Area of the Regenerator for Improving the Refrigeration Efficiency at Liquid-Helium Temperatures