Abstract:By employing a graded-interfaces model based on a generalized formalism for interface-roughness (IFR) scattering that was modified for mid-infrared emitting quantum cascade lasers (QCLs), we have accurately reproduced the electro-optical characteristics of published record-performance 4.9 μm- and 8.3 μm-emitting QCLs. The IFR-scattering parameters at various interfaces were obtained from measured values and trends found via atom-probe tomography analysis of one of our 4.6 μm-emitting QCL structures with variable barrier heights. Those values and trends, when used for designing a graded-interface, 4.6 μm-emitting QCL, led to experimental device characteristics in very good agreement with calculated ones. We find that the published record-high performance values are mainly due to both injection from a prior-stage low-energy (active-region) state directly into the upper-laser ( ul ) level, thus at low field-strength values, as well as to strong photon-induced carrier transport. However, the normalized leakage-current density J leak / J is found to be quite high: 26–28 % and 23.3 %, respectively, mainly because of IFR-triggered shunt-type leakage through high-energy active-region states, in the presence of high average electron temperatures in the ul laser level and an energy state adjacent to it: 1060 K and 466 K for 4.9 μm- and 8.3 μm-emitting QCLs, respectively. Then, modeling with graded interfaces becomes a tool for designing devices of performances superior to the best reported to date, thus closing in on fundamental limits. The model is employed to design a graded-interface 8.1 μm-emitting QCL with suppressed carrier leakage via conduction-band engineering, which reaches a maximum front-facet wall-plug efficiency value of 22.2 %, significantly higher than the current record (17 %); thus, a value close to the fundamental front-facet, upper limit (i.e., 25 %) for ∼8 μm-emitting QCLs.

Enhancement of longitudinal mode characteristic of quantum cascade laser by high-order tilted asymmetric surface grating

The study on application of high-order tilted asymmetric Bragg gratings in quantum cascade lasers

Mode Selection in InGaAs/InGaAsP Quantum Well Photonic Crystal Lasers Based on Coupled Double-Heterostructure Cavities.

Stable Single-Mode Operation of Distributed Feedback Quantum Cascade Laser under High Current Via a Grating Reflector

High Single-Mode Selectivity V-cavity Tunable Semiconductor Laser Based on GaAs

Single Mode Operation of Short-Cavity Quantum Cascade Lasers

Single-mode Interband Cascade Laser Based on V-coupled Cavity with 210 Nm Wavelength Tuning Range Near 3 Μm.

Single-Mode Tunable Interband Cascade Laser Emitting at 3.4 Μm with a Wide Tuning Range over 100 Nm

Study of Gain-Coupled Distributed Feedback Laser Based on High Order Surface Gain-Coupled Gratings

Quasi-Continuous Wavelength Tuning of Single-mode Interband Cascade Lasers Based on V-coupled Cavity

High-performance 1.06-Μm InGaAs/GaAs Double-Quantum-well Semiconductor Lasers with Asymmetric Heterostructure Layers

Modeling with graded interfaces: Tool for understanding and designing record-high power and efficiency mid-infrared quantum cascade lasers

InGaAsP/InP Based Q-modulated Slotted Fabry-Perot Laser Employing Lossy Half-Wave Trenches

Mid-infrared Widely Tunable Single-Mode Interband Cascade Lasers Based on V-coupled Cavities.

Full C-Band Tunable V-Cavity-Laser Based Tosa and Sfp Transceiver Modules

Mid-infrared Tunable Interband Cascade Laser Employing Double-Trench Waveguide Structure with a Tuning Range of 118 Nm

Multidimensional Conduction-Band Engineering for Maximizing the Continuous-Wave (CW) Wallplug Efficiencies of Mid-Infrared Quantum Cascade Lasers

Monolithically, widely tunable quantum cascade lasers based on a heterogeneous active region design

Gain-coupled 770 Nm DFB Semiconductor Laser Based on Surface Grating

Numerical investigation of vertical-cavity surface-emitting lasers incorporating a high-contrast grating using 3-D FDTD method

High performance distributed feedback quantum dot lasers with laterally coupled dielectric grating