Abstract:In recent years, the materials of plasma facing components, such as divertor target plates, domes, and outer walls of tokamaks, such as ASDEX Upgrade, WEST, JET, EAST, and ITER, have been changed from carbon to tungsten because of its lower erosion and tritium retention rates. Impurities are produced by interactions between the plasma and the first wall. This study provides an investigation to simulate the transport and distribution of tungsten impurities in the edge plasma on EAST. The 2D multi-fluid edge plasma transport code SOLPS-ITER and 2D kinetic Monte Carlo impurity transport code DIVIMP were used in the simulations. The multi-fluid model in SOLPS-ITER and the kinetic Monte Carlo model in DIVIMP were employed to treat tungsten impurity ions. The 2D density contour distributions in the computational region and the 1D density radial profiles at the inner and outer midplanes of tungsten impurity particles with ionization states (W0–W+74) and the total tungsten particles with all charge states were obtained. With the heating power 1.5 MW and the line-averaged plasma density 2 × 1019 m−3, the results from SOLPS-ITER and DIVIMP show that the maximum density of tungsten ion with single ionization state is about 1014 m−3 and the total density of tungsten impurities with all charge states is about 1015 m−3 at the core boundary. To the best of our knowledge, the simulation results from SOLPS-ITER and DIVIMP are compared for the first time to benchmark SOLPS-ITER with the multi-fluid mode and DIVIMP with the kinetic model for tungsten impurity transport. The density distributions of tungsten impurities with different ionization states from SOLPS-ITER and DIVIMP are highly similar, and good agreement can be found under similar conditions involved in the calculation. From the comparison benchmark between SOLPS-ITER and DIVIMP for tungsten impurity transport, it can be concluded that the impurity transport approximation used by DIVIMP is good.

Validated edge and core predictions of tungsten erosion and transport in JET ELMy H-mode plasmas

Validation of the ERO2.0 code using W7-X and JET experiments and predictions for ITER operation

Modelling of plasma facing component erosion, impurity migration, dust transport and melting processes at JET-ILW

Gyrokinetic prediction of core tungsten peaking in a WEST plasma with nitrogen impurities

Flux-driven integrated modelling of main ion pressure and trace tungsten transport in ASDEX Upgrade

Evaluation of edge transport and core accumulation of tungsten for CFETR with EMC3-EIRENE and STRAHL

Heavy impurity transport in tokamaks subject to plasma rotation, NTV and the influence of saturated ideal MHD perturbations

Modeling of Inter- and Intra-Edge-localized Mode Tungsten Erosion During DIII-D H-mode Discharges

Understanding core heavy impurity transport in a hybrid discharge on EAST

Illustrating the physics of core tungsten (W) transport in a long-pulse steady-state H-mode discharge on EAST

Multi-physics modeling of the long-term evolution of helium plasma exposed surfaces

Experimental estimation of tungsten impurity sputtering due to Type I ELMs in JET-ITER-like wall using pedestal electron cyclotron emission and target Langmuir probe measurements

High erosion and re-deposition rates of tungsten in the highly collisional plasmas of Magnum-PSI

Study of DIII-D Tungsten Erosion Processes by Using a Carbon–tungsten Mixed Material Model

Modeling of Tungsten Impurity Transport and Distribution in EAST Based on Multi-Fluid and Kinetic Monte Carlo Simulations

Modeling of tungsten divertor target erosion induced by impurity during edge‐localized modes by using a kinetic model

Heavy impurity confinement in hybrid operation scenario plasmas with a rotating 1/1 continuous mode

Edge Plasma Modelling For Transport Analysis On Jt-60u Tokamak

Full-radius integrated modelling of ASDEX Upgrade L-modes including impurity transport and radiation

Testing validity of 1D models for impurity fraction scalings for divertor detachment with EDGE2D-EIRENE