Abstract:Variable geometry turbines are widely employed to improve the off-design performance of gas turbine engines; however, there is a performance penalty associated with the vane-end partial gap required for the movement of variable vanes. This paper is a continuation of the previous work and aims to understand the leakage flow and loss mechanisms under the influence of the pivoting axis. Experimental investigations with a variable geometry turbine linear cascade have been conducted for tip gap heights of 1.1% and 2.2% blade spans as well as setting angles of −6°, 0°, and 6°, so as to reveal the three-dimensional clearance flow characteristics associated with partial gaps. Besides, numerical predictions are also carried out to better understand the experimental results. Pressure measurements were performed on the tip endwall as well as on the vane surface, and three-dimensional clearance flow fields downstream of the variable cascade were measured with a five-hole probe. The results show that as the vane setting angle is changed from design to closed, the vane loading increases and tends to be more aft-loaded, thus increasing the tip leakage loss, and vice versa. There are strong interactions between the flow around the pivoting axis and the leakage flow in the vane tip rear part, which leads to a low-pressure region on the tip endwall. The leakage vortex core is made up of the leakage flow in the vane tip rear part at both two tip gap heights, and the leakage vortex core formation process is different from the one in the rotor blade. The present results can provide useful references for the vane-end clearance design of variable geometry turbines.

Experimental study on the rapid establishment of the transonic gap flow field

Exploring the Aerodynamic Effect of Blade Gap Size via a Transient Simulation of a Four-Stage Turbine

Numerical Study of Tip Leakage Vortex Around a NACA0009 Hydrofoil

High-frequency unsteady flow near the tip in a transonic fan rotor with a small clearance

Numerical Simulation Of A Transonic Centrifugal Compressor Blades Tip Clearance Flow Of Vehicle Turbocharger

Numerical Investigation on the Effects of Gap Circulating Flow on Blower Performance under Design and Off-Design Conditions

Impact of a gap on boundary layer transition at Mach 6

A New Approach to Suppress Tip Leakage Flow Utilizing Induced Shock Wave in Tip Region of a Transonic Compressor Rotor

Tip Gap Size Effects on Thermal Performance of Cavity-Winglet Tips in Transonic Turbine Cascade with Endwall Motion

Aerothermal Performance of Different Tips in Transonic Turbine Cascade with End-Wall Motion

Gap-induced Transition Via Oblique Breakdown at Mach 6

Experimental and numerical investigations of tip clearance flow and loss in a variable geometry turbine cascade

Lock-in effect of over-tip shock waves and identification of the escaping vortex-shedding mode in pressure-driven tip leakage flow

Numerical Simulation on Unsteady Flow Mechanism of a 1.5-Stage Axial Transonic Compressor

Prediction of mean flow and over-tip shock distribution in pressure-driven tip leakage flows

Numerical investigation of the unsteady tip leakage flow and rotating stall inception in a transonic compressor

Experiment on Tip Flow Property of High Speed Axial Flow Compressor

Investigation of Transonic Flow Features in an Axial Flow Compressor Rotor

Transient Flow Dynamics Analysis of a Large Prototype Francis Turbine at Different Loads

Vortex Flows in the Blade Tip Region of a Transonic Centrifugal Compressor

Investigation of Flow Structure in a Turbocharger Turbine under Pulsating Flow Conditions