Abstract:Spiral-wound modules have been the most common configuration of packing flat-sheet membranes since the early development of polyamide (PA) membranes for water treatment applications. Conventional spiral-wound modules (SWMs) for desalination applications typically consist of several leaf sets, with each leaf set comprising feed spacers, membranes, and a permeate carrier (PC) wrapped around a permeate-collecting tube. The membrane area that can be packed into a given module diameter is limited by the overall leaf set thickness, restricting module productivity for a given membrane permeability. We describe here a novel industrial-scale method for successfully coating the polysulfone (PSf) ultrafiltration (UF) support layer directly onto a permeate carrier, instead of conventional non-woven fabric, as a precursor to the polyamide TFC coating, resulting in twofold benefits: (a) drastically simplifying the membrane fabrication process by eliminating the use of non-woven fabric and (b) increasing the throughput of each membrane module by facilitating the packing of a larger membrane area in a standard module housing. By combining the permeate carrier and membrane into a single sheet, the need for the non-woven support layer was eliminated, leading to a significantly reduced leaf set thickness, enabling a much larger membrane area to be packed in a given volume, leading to lower energy consumption per cubic meter of produced water. Molecular-weight cutoff (MWCO) values in the range of 36–96 kDa were found to be dependent on PC thickness and material. Nevertheless, the reinforced membranes were successfully fabricated with a ~9% reduction in membrane leaf thickness compared to a conventional membrane. Preliminary trials of coating a thin-film composite PA layer resulted in defect-free reverse osmosis (RO) membranes with a salt rejection of 94% and a flux of 40 L m−2 h−1 when tested against a 2000 mg/L NaCl feed solution at an operating pressure of 15 bar. Results from the testing of the 1812 and 2514 elements validated the novel concept and paved the way for further improvements towards full-scale RO membranes with the potential to be the next low-energy workhorse of the water industry.

Layer-by-layer (LBL) assembly technology as promising strategy for tailoring pressure-driven desalination membranes

Nanofiltration membranes prepared by layer-by-layer self-assembly of polyelectrolyte

Data-Driven Design of Nanopore Graphene for Water Desalination

Recent advances of nanocomposite membranes using layer-by-layer assembly

Enhancing water permeability and antifouling performance of thin–film composite membrane by tailoring the support layer

Seawater desalination by reverse osmosis: Current development and future challenges in membrane fabrication – A review

Building ordered graphene membranes by intermediate layer assisted stacking method for promoted desalination

Progress and prospects of two-dimensional materials for membrane-based water desalination

The membrane-based desalination: Focus on MOFs and COFs

Novel reverse osmosis membranes incorporated with Co-Al layered double hydroxide (LDH) with enhanced performance for brackish water desalination

Electrospun nanofibrous membranes as promising materials for developing high-performance desalination technologies

Lyotropic Liquid Crystal (LLC)-Templated Nanofiltration Membranes by Precisely Administering LLC/Substrate Interfacial Structure

Laminated GO membranes for water transport and ions selectivity: Mechanism, synthesis, stabilization, and applications

Development and Industrial-Scale Fabrication of Next-Generation Low-Energy Membranes for Desalination

Layer-by-layer (LBL) hollow fiber nanofiltration membranes for seawater treatment: Ion rejection

Flexible layered double hydroxides array composite membrane for efficient pervaporation desalination

Forward Osmosis Membrane Separation Technology Based on Desalination

Layer-Controlled Synthesis of a Silanol–Graphene Oxide Nanosheet Composite Forward Osmosis Membrane by Surface Self-Assembly

The Future of Freshwater Access: Functional Material-Based Nano-Membranes for Desalination

Layer-by-layer assembly of polyethyleneimine/graphene oxide membranes for desalination of high-salinity water via pervaporation

Manipulating 2D Membrane Interlayer Channels with Accelerated Mass‐Transfer Behavior to Boost Solar Desalination