Abstract:To achieve an adjustable setting time and significantly improved early strength of a new type of sulphoaluminate cement-based double-liquid grouting material (SACDL), the effects of calcium formate, sodium sulfate, lithium carbonate, and a composite early strength agent on the setting hardening and early hydration behavior of SACDL paste were studied by means of setting time, fluidity, compressive strength, and viscosity tests. The results showed that the adsorption and osmosis of calcium formate, the complex decomposition of sodium sulfate, the precipitation polarization of lithium carbonate and the synergistic action of the composite early strength agent could accelerate the early hydration rate of SACDL, shorten the coagulation time, and improve the early strength of SACDL. The composite effect of 0.8% calcium formate and 0.5% sodium sulfate is the most significant in promoting coagulation and early strength; the initial setting time and final setting time of the slurry were shortened to 5 min and 10 min, respectively; and the 3 h compressive strength was capable of reaching 16.7 MPa, 31% higher than that of the blank group. In addition, X-ray diffraction and SEM morphology observation were used to study the composition of the hydration products and the evolution of the microstructure, which revealed the early hydration mechanism of SACDL under the synergistic effect of the composite early strength agent: (1) The solubility of tricalcium aluminate (C3A) and dihydrate gypsum (CaSO4·2H2O) increased under the low content composite early strength agent condition, which increased the ettringite (AFt) formation rate. HCOO− was able to penetrate the hydration layers of tricalcium silicate (C3S) and dicalcium silicate (C2S), accelerating the dissolution of C3S and C2S and promoting the early hydration of SACDL. (2) Under the condition of a high dosage of the composite early strength agent, the further increase in Ca2+ concentration promoted the crystallization nodules and precipitation of CH and accelerated the formation of calcium silicate hydrate (C-S-H) gel. C-S-H was filled between a large number of rod-like AFt crystals, thus making the structure more dense.

Accelerating strength development of cementitious mixtures using aluminum sulfate liquid accelerator with aluminium formate

Properties and acceleration mechanism of cement mortar added with low alkaline liquid state setting accelerator

Research on the Working Performance and the Corresponding Mechanical Strength of Polyaluminum Sulfate Early Strength Alkali-Free Liquid Accelerator Matrix Cement

Effects of Using Aluminum Sulfate as an Accelerator and Acrylic Acid, Aluminum Fluoride, or Alkanolamine as a Regulator in Early Cement Setting

Preparation and hydration mechanism of aluminum formate/aluminum sulfate based alkali-free composite accelerator for sprayed concrete

Formulation of an alkali-free accelerator and its effects on hydration and mechanical properties of Portland cement

Microstructure Refinement of Calcium-Sulfate-aluminate and Portland Cement (CSA-PC) Hybrids with Accelerated CO2 Curing (ACC)

Development of a Novel Double-Sulfate Composite Early Strength Agent to Improve the Hydration Hardening Properties of Portland Cement Paste

Accelerators for Shotcrete – Chemical Composition and Their Effects on Hydration, Microstructure and Properties of Cement-Based Materials

The Coordination of Aluminum Sulfate with a Water-Soluble Block Copolymer Containing Carboxyl, Amide, Sulfonic and Anhydride Groups Providing Both Accelerating and Hardening Effects in Cement Setting

Evaluation of the early strength of limestone-slag-cement ternary composite mortar improved by aluminum sulfate

Preparation of alkali-free liquid accelerator with fluorine-containing silicon residue and its accelerating mechanism

The influence and mechanism analysis of aluminum sulfate as an environmentally friendly early strength agent on the properties of cement-based materials

Preparation and properties of hexafluorosilicic acid series accelerators

Al(SO4)(OH)·5H2O Stemming from Complexation of Aluminum Sulfate with Water-Soluble Ternary Copolymer and further Stabilized by Silica Gel as Effective Admixtures for Enhanced Mortar Cementing

Evaluation of setting and hardening properties of accelerator and slag-silica fume-cements

Study on Early Hydration Mechanism of Double-Liquid Grouting Material Modified by Composite Early Strength Agent

Study of Aluminum Sulfate and Anhydrite on Cement Hydration Process

The Influence of Alkali-Free Shotcrete Accelerators on Early Age Hydration and Property Development within Cement Systems

Effects of Accelerators and Retarders in Early Strength Development of Concrete Based on Low-Temperature-Cured Ordinary Portland and Calcium Sulfoaluminate Cement Blends

Regulating Effect of Cement Accelerator on High Content Solid-Wastes Autoclaved Aerated Concrete (HCS-AAC) Slurry Performance and Subsequent Influence