Abstract:The ever-increasing silicon photovoltaics industry produces a huge annual production of silicon waste (2.03 × 105 tons in 2019), while lignin is one of the main waste materials in the traditional paper industry (7.0 × 107 tons annually), which lead to not only enormous wastage of resources but also serious environment pollution. Lithium-ion batteries (LIBs) are the dominating power sources for portable electronics and electric vehicles. Silicon (Si)-based material is the most promising anode choice for the next-generation high-energy-density LIBs due to its much higher capacity than the commercial graphite anode. Here, we proposed the use of these silicon and lignin waste as sustainable raw materials to fabricate high-capacity silicon/carbon (Si/C) anode materials for LIBs via a facile coprecipitation method utilizing electrostatic attracting force, followed by a thermal annealing process. The as-achieved Si/C composite featured an advanced material structure with micrometer-sized secondary particles and Si nanoparticles embedded in the carbon matrix, which could tackle the inherent challenges of Si materials, including low conductivity and large volume change during the lithiation/delithiation processes. As expected, the obtained Si/C composite displayed an initial charge capacity of 1016.8 mAh g–1, which was 3 times that of a commercial graphite anode in the state-of-the-art LIBs, as well as a high capacity retention of 74.5% at 0.2 A g–1 after 100 cycles. In addition, this Si/C composite delivered superior rate capability with a high capacity of 575.9 mAh g–1 at 2 A g–1, 63.4% of the capacity at 0.2 A g–1. The utilization of industrial Si and lignin waste provides a sustainable route for the fabrication of advanced high-capacity anode materials for the next-generation LIBs with high economic and environmental feasibility.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16865?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16865</a>.Additional experimental data including SEM, TEM, and HR-TEM images of Si–C and Si/C composite after cycles and EIS spectra of Si/C and pure Si before cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16865/suppl_file/am0c16865_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Utilization of Si/SiOx/Al2O3 material from recycled solar cells for high-performance lithium-ion battery anode

In Situ Formation of Ionically Conductive Nanointerphase on Si Particles for Stable Battery Anode

Recycling silicon-based industrial waste as sustainable sources of Si/SiO2 composites for high-performance Li-ion battery anodes

High stability of sub-micro-sized silicon/carbon composites using recycling Silicon waste for lithium-ion battery anode

Manufacturing lithium-ion anodes from silicon recovered from end-of-life solar panels

Recycling waste crystalline-silicon solar cells: Application as high performance Si-based anode materials for lithium-ion batteries

Facile Fabrication of High-Performance Li-Ion Battery Carbonaceous Anode from Li-Ion Battery Waste

Recycling Silicon Waste from the Photovoltaic Industry to Prepare Yolk–Shell Si@void@C Anode Materials for Lithium–Ion Batteries

Recycling of Lignin and Si Waste for Advanced Si/C Battery Anodes

Self-supporting Multi-Carbon Composites Assist Recycled-Silicon for High-Performance Lithium Storage

Recycling Silicon Scrap for Spherical Si-C composite as High-Performance Lithium-ion Battery Anodes

Improved Lithium Storage Capability of Si Anode by Ball-Milling Produced Graphitic Carbon Sheet and Fe3O4 Nanoparticles

Spent graphite as promising carbon matrix for high performance SiO/C anode material of Li-ion battery

Simple preparation of Si/CNTs/C composite derived from photovoltaic waste silicon powder as high-performance anode material for Li-ion batteries

Pyromellitic Acid Induced Stable Lithium Ion Batteries Based on Recycled Silicon Flakes

Simple preparation of Si/N-doped carbon anodes from photovoltaic industry waste for lithium-ion batteries

PSi@SiOx/Nano-Ag composite derived from silicon cutting waste as high-performance anode material for Li-ion batteries

Transforming silicon slag into high‐capacity anode material for lithium‐ion batteries

Practical 2-step milling process for sustainable lithium-ion battery anodes from photovoltaic module recycling

From natural material to high-performance silicon based anode: Towards cost-efficient silicon based electrodes in high-performance Li-ion batteries

Cost-effective preparation of high-performance Si@C anode for lithium-ion batteries