Abstract:In the context of racing to carbon neutrality, the pipe-embedded building system makes the opaque envelopes gradually regarded as the multi-functional element, which also provides an opportunity for thermal insulation solutions to transform from high to zero-carbon attributes. Based on the re-examination of the heat transfer process of conventional pipe-embedded radiant (CPR) walls, the modular pipe-embedded radiant (MPR) wall integrated with thermal diffusive materials is proposed to enhance the heat transfer capacity of CPR walls in the direction parallel to the wall surface, thereby forming a more stable and continuous invisible thermal barrier layer inside the opaque envelopes. A comprehensive thermal and energy-saving analysis study regarding the influence mechanism of several key factors of MPR walls, e.g., the inclination angle of the filler cavity ( θ -value), geometry size of the filler cavity ( a:b -value) and thermal conductivity of the filler (λ f -value), is conducted based on a validated numerical model. Results show that the dynamic thermal behaviors of MPR walls can be significantly improved due to that the radial thermal resistance in the filler cavity of MPR walls can be reduced by 50%, while the maximum extra exterior surface heat loss caused by the optimization measures is only 2.1%. Besides, a better technical effect can be achieved by setting the major axis of the filler cavity towards the room side, where the interior surface heat load/total injected heat first decreases/increases and then increases/decreases with the increase of the θ -value. In particular, the MPR wall with θ L = 60° can obtain the best performance when other conditions remain the same. Moreover, the performance indicators of MPR walls can be further improved with the increase of the cavity size ( a:b -value), while showing a trend of rapid improvement in the λ f -value range of 2–5λ C and slow improvement increase in the λ f -value range of 5–12λ C . In addition, the improvement effect brought by optimizing the θ -value is more obvious as the a:b -value or λ f -value increases.

Experimental study of the coupled wall system of pipe-encapsulated PCM wall and nocturnal sky radiator for self-activated heat removal

Simulation Study of a Pipe-Encapsulated PCM Wall System with Self-Activated Heat Removal by Nocturnal Sky Radiation

Model Validation and Application of the Coupled System of Pipe-Encapsulated PCM Wall and Nocturnal Sky Radiator

CLIMA 2019-Modelling Study on Pipe-Encapsulated PCM Wall System for Building Insulation and Active Heat Removal

Performance Evaluation of a PCM-embedded Wall Integrated with a Nocturnal Sky Radiator

Dynamic Simplified PCM Models for the Pipe-Encapsulated PCM Wall System for Self-Activated Heat Removal

Parametric Analysis on Performances of the Pipe-Encapsulated PCM (penpcm) Wall System Coupled with Gravity Heat-Pipe and Nocturnal Radiant Cooler

Parametric Analysis of the Phase Change Material Wall Combining with Micro-Channel Heat Pipe and Sky Radiative Cooling Technology

Numerical Study on the Thermal Performance of Phase Change Materials Wall by Radiative Cooling

Experimental study on the performance of a novel RC-PCM-wall

Thermal Performance of a Novel Building Wall Incorporating a Dynamic Phase Change Material Layer for Efficient Utilization of Passive Solar Energy

Performance analysis of a novel phase-change wall of wood structure coupled with sky-radiation cooling

Experimental and Numerical Performance Analysis of an Active Cooling Wall Module Equipped with Micro-encapsulated Phase Change Material

Research on Heat Transfer Performance of Passive Solar Collector-Storage Wall System with Phase Change Materials

Dynamic thermal performance of pipe-embedded building envelope utilizing evaporative cooling water in the cooling season

An active pipe-embedded building envelope for utilizing low-grade energy sources

Dynamic thermal performance and energy-saving potential analysis of a modular pipe-embedded building envelope integrated with thermal diffusive materials

Efficient heating of buildings by passive solar energy utilizing an innovative dynamic building envelope incorporating phase change material

Study of the characteristics of the separated gravity heat pipe of a self-activated PCM wall system

Performance evaluation of an active pipe-embedded building envelope system to transfer solar heat gain from the south to the north external wall

Numerical study and experimental validation of a multi-functional dual-air-channel solar wall system with PCM