Abstract:The maximum sensitivity function as the conventional robustness index is often used to test the robustness and cannot be used to tune the controller parameters directly. To reduce analytical difficulties in dealing with the maximum sensitivity function and improve the control performance of the proportional-integral-derivative controller, the relative delay margin as a good alternative is proposed to offer a simple robust analysis for the proportional-integral-derivative controller and the first-order plus dead-time systems. The relationship between the parameters of the proportional-integral-derivative controller and the new pair, e.g., the phase margin and the corresponding gain crossover frequency, is derived. Based on this work, the stability regions of the proportional-integral-derivative controller parameters, the proportional gain and the integral gain with a given derivative gain, are obtained in a simple way. The tuning of the proportional-integral-derivative controller with constraints on the relative delay margin is simplified into an optimal disturbance rejection problem and the tuning procedure is summarized. For convenience, the recommended parameters are also offered. Simulation results demonstrate that the proposed methodology has better tracking and disturbance rejection performance than other comparative design methodologies of the proportional-integral/proportional-integral-derivative controller. For example, the integrated absolute errors of the proposed proportional-integral-derivative controller for the tracking performance and disturbance rejection performance are less than 91.3% and 91.7% of the integrated absolute errors of other comparative controllers in Example 3, respectively. The proposed methodology shows great potential in industrial applications. Besides, the proposed method can be applied to the design of the proportional-integral-derivative controller with filtered derivative which is recommended for practical applications to weaken the adverse influence of the high-frequency measurement noise.

A rule of robust optimal parameter tuning of Active Disturbance Rejection Control based on second order plus dead time model approximation

Application of particle swarm optimization algorithm on robust PID controller tuning

Robust Pid Controller Design Using Co-Evolutionary Particle Swarm Optimization

Tuning Method for Second-Order Active Disturbance Rejection Control

Quantitative Tuning of Active Disturbance Rejection Controller for FOPTD Model With Application to Power Plant Control

Optimal Disturbance Rejection for Pi Controller with Constraints on Relative Delay Margin

A Tuning Method of Active Disturbance Rejection Control for a Class of High-Order Processes.

Robust Proportional–Integral–Derivative (PID) Design for Parameter Uncertain Second-Order Plus Time Delay (SOPTD) Processes Based on Reference Model Approximation

Exact Robust Tuning Rules for Integrating Processes with Dead Time: a Frequency Response Model Matching Approach

Adaptive GSA-based optimal tuning of PI controlled servo systems with reduced process parametric sensitivity, robust stability and controller robustness

Robust 2dof PI Tuning Rules for Integrating Processes with Dead Time Via Frequency Response Model Matching.

The Improved Particle Swarm Optimization Method: An Efficient Parameter Tuning Method with the Tuning Parameters of a Dual-Motor Active Disturbance Rejection Controller

Parameter Tuning for Decentralized Low-Order Active Disturbance Rejection Control Scheme

Maximum Sensitivity-Constrained Data-Driven Active Disturbance Rejection Control with Application to Airflow Control in Power Plant

On Tuning and Practical Implementation of Active Disturbance Rejection Controller: A Case Study from a Regenerative Heater in a 1000 MW Power Plant

Robust Fine Tuning of Optimal PID Controller With Guaranteed Robustness

Robust PI Control Design Using Particle Swarm Optimization

An ADRC‐based PID Tuning Rule

A new PID controller design with constraints on relative delay margin for first-order plus dead- time systems

A Robust Pid Tuning Method For Unstable Foptd Process

Tuning of Active Disturbance Rejection Control with Application to Power Plant Furnace Regulation