Abstract:The microstructural characteristics and morphological attributes of the target material, along with its intrinsic properties, can significantly influence the performance of the resultant film. Currently, commercially available nickel-vanadium targets employed in the industry have not been subjected to investigations aimed at controlling grain size and grain orientation. This study examines the effects of unidirectional rolling at room temperature, combined with substantial deformation, on the alterations in microstructure, texture evolution, and mechanical properties of the NiV7 alloy. The process of severe plastic cold rolling leads to a continuous elongation and refinement of the grains. The changes in microstructure and texture of the cold-rolled sheets were analyzed using electron backscatter diffraction (EBSD) technology. At an 80% reduction, a significant number of sub-grains are observed, which transform into deformed grains as the reduction reaches 95%. With a thickness reduction of 96.6%, the average grain size is approximately 1.10μm. Further increases in reduction do not lead to significant alterations in the grain structure; instead, the grain orientation progressively becomes more uniform with higher levels of deformation. The combination of substantial deformation and lower rolling rates results in an increased number of high-angle grain boundaries. The alloy displays various textures throughout the rolling process, including S-type, copper-type, brass-type, fiber, and cubic textures. Notably, the prevalence of S-type and fiber textures diminishes as the degree of deformation increases, while the cubic texture becomes increasingly prominent. Upon achieving a reduction of 95%, the cubic texture emerges as the dominant texture. A transmission electron microscope (TEM) was utilized to examine the extensive array of dislocations, dislocation cells, dislocation walls, and shear bands generated during the cold rolling process. At a deformation level of 96.6%, the ultimate tensile strength of the alloy demonstrates a significant enhancement, attributed to mechanisms of dislocation strengthening and grain strengthening, reaching a value of 1231±20 MPa, accompanied by a post-fracture elongation of approximately 2%. The ultimate tensile strength exhibited an increase of 781±20 MPa compared to the sample prior to the rolling process; however, there was a notable reduction in plasticity.

Strain-induced grain evolution of pure nickel under warm power torsional rolling process

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Improvement of strength and ductility in a gradient structured Ni fabricated by severe torsion deformation

Study on the shear-torsion deformation of rotary tube piercing process for nickel base superalloy

Microstructural Evolution, Mechanical Properties and Thermal Stability of Gradient Structured Pure Nickel

Grain Growth Mechanism of Lamellar-Structure High-Purity Nickel via Cold Rolling and Cryorolling during Annealing

An innovative approach towards forming the serrated grain boundaries and refining the γ′ precipitates in nickel-based superalloys

Achieving High Strength and Tensile Ductility in Pure Nickel by Cryorolling with Subsequent Low-Temperature Short-Time Annealing

Microstructure and Mechanical Properties of Nickel Processed by Accumulative Roll Bonding

Grain Refinement of a Powder Nickel-Base Superalloy Using Hot Deformation and Slow-Cooling

Severe plastic cold rolling effects in Nickel-Vanadium alloy: Microstructure, texture evolution and mechanical properties

Effect of deformation processing on microstructure and mechanical properties of Ti-42Nb-7Zr alloy

Influence of Thermomechanical Control Process on the Evolution of Austenite Grain Size in a Low-Carbon Nb-Ti-Bearing Bainitic Steel

Influence of Deformation Rate on Nucleation and Growth of Recrystallized Grains during Hot Deformation of Nickel-Based Powder Superalloys

Grain Orientation Induced Softening in Electrodeposited Gradient Nanostructured Nickel during Cold Rolling Deformation

Feasible evolution process of tensile property dominant effect factor in annealed high purity nickel by a combination of in situ tensile technique and EBSD

High-pressure strengthening in ultrafine-grained metals

Preparation of ultrafine-grained Nb-1Zr alloy by increasing the time of large plastic deformation during friction stir processing

The Effects of Severe Torsion on Microstructure, Texture, and Mechanical Properties of a Pure Nickel Rod

Evolution of microstructural parameters and flow stresses toward limits in nickel deformed to ultra-high strains

Effect of a Gradient Temperature Rolling Process on the Microstructure and Mechanical Properties of the Center of Ultra-Heavy Plates