Abstract:The hadal zone (ocean depths of 6–11 km) is one of the least-understood habitats on Earth because of its extreme conditions such as high pressure, darkness, and low temperature. With the development of deep-sea vehicles such as China's 7000 m manned submersible Jiaolong, abyssal science has received greater attention. For decades, gravity-piston corers have been widely used to collect loose subsea-sediment long-core samples. However, the weight and length of the gravity sampler cables and the operating environment limit sampling capacity at full ocean depths. Therefore, a new self-floating sediment sampler with a spring-loaded auto-trigger release and that incorporates characteristics from traditional gravity-driven samplers is designed. This study analyzes the process by which a gravity-piston corer penetrates the sediment and the factors that affect it. A formula for obtaining the penetration depth is deduced. A method of optimizing the sampling depth is then developed based on structure design and parametric factor modeling. The parameters considered in the modeling include the sampling depth, balance weight, ultimate stress friction coefficient, dimensions of the sampler, and material properties. Thus, a new deep-sea floating parametric sampler designed based on virtual prototyping is proposed. Accurate values for all the design factors are derived from calculations based on the conservation of energy with penetration depth, analyses of the factors affecting the penetration depth, and analyses of the pressure bar stability. Finally, experimental data are used to verify the penetration-depth function and to provide theoretical guidance for the design of sediment samplers.

An in-situ portable pore-water sampler for evaluating the vertical distribution in the sediment interface

A New Deep-Sea Gas-Tight Isobaric Water Sampler

Analysis of Displacement Performance for a Horizontal Flowthrough Sequence Water Sampler

A Pressure-Triggered Isobaric Sequential Liquid Sampling System for Full-Ocean-depth: Design and Field Deployment

MFPD: Multi-sequence Flow-through Pressure-retaining Sampler for Deep Sea Geofluid Research

Design and study of a deep-sea multi-depth in-situ pore water pressure-retaining sampler

Sealing Performance Analysis of Deep-Sea Sediment Sampler

Study on the Pressure Retention Characteristic of a New Isobaric Water Sampler

A Pressure-Retaining Sampling Device for Deep-Sea Sediments

Design and Experimental Study of a Novel Full-ocean-depth Pressure-retaining Sediment Sampler

A novel submersible-mounted sediment pressure-retaining sampler at full ocean depth

A Passive Sampler for Synchronously Measuring Inorganic and Organic Pollutants in Sediment Porewater: Configuration and Field Application

A Deep-Sea Sediment Sampling System: Design, Analysis and Experimental Verification

Capturing Amphipods in the Mariana Trench with a Novel Pressure Retaining Sampler

Design and Optimization of Multipoint Sampler for Seafloor Sediment Carried by a Deep-Sea Landing Vehicle

Design of Pressure Retention and Transfer System for Abyssal Sediments

A Sediment Sample Transfer, Handing, Encapsulation and Analysis Subsystem Device in State of Fidelity

Pressure-retaining sampler for sediment and overlying seawater based on heavy duty ROV-Jellyfish

A Pressure & Temperature-retained Sampler in Deep Sea and It's Virtual Prototype

Review and Analysis of Key Techniques in Marine Sediment Sampling

Design of Full-Ocean-Depth Self-Floating Sampler and Analysis of Factors Affecting Core Penetration Depth