Abstract:The research on deep-sea hydrothermal fluids, cold springs, and other bottom water bodies has important implications for ecosystems. But the deep-sea environment is very harsh, and many existing sampling devices cannot meet the requirements in terms of sampling purity and gas preservation capabilities. Many current samplers are basically arranged in a vertical manner, which means that a set of trigger devices need to be installed at the entrance and exit of the sampling channel, which consumes a lot of space. Taking the flowthrough deep-seawater sequence sampling mechanism as the research object, we show a horizontal flowthrough water sampler. Through numerical simulation and experimental research on the displacement mechanism of the target sample and prefilled pure water, the displacement efficiencies under different flow velocities and sampling cavity shapes were obtained. The results confirmed that the positions of the inlet and outlet and the shapes of the sampling cavity have little influence on the displacement efficiencies at high flow rates. However, installing the inlet below the sampling cavity and installing the outlet above the sampling cavity can significantly reduce the blind area of displacement. Setting a small inclination angle to the capsule sampling cavity helps to improve the displacement effect at low flow rates. This design and research results not only simplified the complicated trigger mechanism of the traditional vertical water samplers, but also provided a reference for the operation modes of the samplers under different sample conditions.

A Pressure & Temperature-retained Sampler in Deep Sea and It's Virtual Prototype

MFPD: Multi-sequence Flow-through Pressure-retaining Sampler for Deep Sea Geofluid Research

A New Deep-Sea Gas-Tight Isobaric Water Sampler

Study on the Pressure Retention Characteristic of a New Isobaric Water Sampler

Analysis of Displacement Performance for a Horizontal Flowthrough Sequence Water Sampler

A Pressure-Triggered Isobaric Sequential Liquid Sampling System for Full-Ocean-depth: Design and Field Deployment

Measurement and control system for gas-tight deep-sea water sampler based on LabVIEW

Sealing Performance Analysis of Deep-Sea Sediment Sampler

A New Isobaric Water Sampler with the Function of Adaptive Recompression

Design and Performance Analysis of a Pressure Chamber for Simulation of Deep Sea Conditions

A Pressure-Retaining Sampling Device for Deep-Sea Sediments

A Deep-Sea Large-Volume High-Pressure Simulation System—design, Analysis and Experimental Verification

A Deep-Sea Sediment Sampling System: Design, Analysis and Experimental Verification

Design and Experimental Study of a Novel Full-ocean-depth Pressure-retaining Sediment Sampler

Design of Pressure Retention and Transfer System for Abyssal Sediments

Design of hydraulic system for autonomous sampler at deep-sea

Design and study of a deep-sea multi-depth in-situ pore water pressure-retaining sampler

Capturing Amphipods in the Mariana Trench with a Novel Pressure Retaining Sampler

A Sediment Sample Transfer, Handing, Encapsulation and Analysis Subsystem Device in State of Fidelity

A Pressure-Holding Sampling Device for Macro Organisms in Hadal Trenches

Design of A Deep-ocean Sampling Device for Microorganisms with In-situ Filtration and Preservation