Abstract:The research on deep-sea hydrothermal fluids, cold springs, and other bottom water bodies has important implications for ecosystems. But the deep-sea environment is very harsh, and many existing sampling devices cannot meet the requirements in terms of sampling purity and gas preservation capabilities. Many current samplers are basically arranged in a vertical manner, which means that a set of trigger devices need to be installed at the entrance and exit of the sampling channel, which consumes a lot of space. Taking the flowthrough deep-seawater sequence sampling mechanism as the research object, we show a horizontal flowthrough water sampler. Through numerical simulation and experimental research on the displacement mechanism of the target sample and prefilled pure water, the displacement efficiencies under different flow velocities and sampling cavity shapes were obtained. The results confirmed that the positions of the inlet and outlet and the shapes of the sampling cavity have little influence on the displacement efficiencies at high flow rates. However, installing the inlet below the sampling cavity and installing the outlet above the sampling cavity can significantly reduce the blind area of displacement. Setting a small inclination angle to the capsule sampling cavity helps to improve the displacement effect at low flow rates. This design and research results not only simplified the complicated trigger mechanism of the traditional vertical water samplers, but also provided a reference for the operation modes of the samplers under different sample conditions.

A Pressure-Holding Sampling Device for Macro Organisms in Hadal Trenches

Research and Analysis of Pressure-Maintaining Trapping Instrument for Macro-Organisms in Hadal Trenches

A Pressure-Triggered Isobaric Sequential Liquid Sampling System for Full-Ocean-depth: Design and Field Deployment

Capturing Amphipods in the Mariana Trench with a Novel Pressure Retaining Sampler

A New Deep-Sea Gas-Tight Isobaric Water Sampler

MFPD: Multi-sequence Flow-through Pressure-retaining Sampler for Deep Sea Geofluid Research

A Pressure-Retaining Sampling Device for Deep-Sea Sediments

Study on the Pressure Retention Characteristic of a New Isobaric Water Sampler

Collection sediment from Mariana Trench with a novel pressure-retaining sampler

A Deep-Sea Large-Volume High-Pressure Simulation System—design, Analysis and Experimental Verification

Analysis of Displacement Performance for a Horizontal Flowthrough Sequence Water Sampler

Sealing Performance Analysis of Deep-Sea Sediment Sampler

Design and Performance Analysis of a Pressure Chamber for Simulation of Deep Sea Conditions

Design and Experimental Study of a Novel Full-ocean-depth Pressure-retaining Sediment Sampler

A novel active deep-sea low-damage pressure-retaining organisms sampler

A Novel Sediment Pressure Sampling Device Carried by a Hadal-Rated Lander

A novel submersible-mounted sediment pressure-retaining sampler at full ocean depth

A New Isobaric Water Sampler with the Function of Adaptive Recompression

Design of Pressure Retention and Transfer System for Abyssal Sediments

Development of a Hadal Microbial In Situ Multi-Stage Filtering and Preserving Device

Pressure Tight Sampling Technique for Deep-Sea Sediment and Its Application