Coupled Flow Simulation in Coalbed Methane Reservoirs
Guo Xiao,Yu Fu,Zhijiang Du,Shu Zhang
DOI: https://doi.org/10.2523/91397-ms
2004-01-01
Abstract:Coupled Flow Simulation in Coalbed Methane Reservoirs Xiao Guo; Xiao Guo The State Key Lab of Oil/Gas Reservoir Geology and Exploitation Search for other works by this author on: This Site Google Scholar Yu Fu; Yu Fu The State Key Lab of Oil/Gas Reservoir Geology and Exploitation Search for other works by this author on: This Site Google Scholar Zhimin Du; Zhimin Du The State Key Lab of Oil/Gas Reservoir Geology and Exploitation Search for other works by this author on: This Site Google Scholar Zhuangzhi Shu Zhuangzhi Shu Southern Exploration & Production Company Search for other works by this author on: This Site Google Scholar Paper presented at the SPE Eastern Regional Meeting, Charleston, West Virginia, September 2004. Paper Number: SPE-91397-MS https://doi.org/10.2118/91397-MS Published: September 15 2004 Cite View This Citation Add to Citation Manager Share Icon Share Twitter LinkedIn Get Permissions Search Site Citation Guo, Xiao, Fu, Yu, Du, Zhimin, and Zhuangzhi Shu. "Coupled Flow Simulation in Coalbed Methane Reservoirs." Paper presented at the SPE Eastern Regional Meeting, Charleston, West Virginia, September 2004. doi: https://doi.org/10.2118/91397-MS Download citation file: Ris (Zotero) Reference Manager EasyBib Bookends Mendeley Papers EndNote RefWorks BibTex Search Dropdown Menu nav search search input Search input auto suggest search filter All ContentAll ProceedingsSociety of Petroleum Engineers (SPE)SPE Eastern Regional Meeting Search Advanced Search AbstractCoal seams are characteristic of two distinct porosity systems: macropores and micropores, similar to fracture systems and matrix systems for fractured hydrocarbon reservoirs. Since coal is relatively impermeable, any coalbed methane (CBM) recovered usually must flow through existing fracture systems helping increase the flow rate of CBM, which may induce CBM non-darcy (N-D) flow when high CBM rate. During CBM depletion, the deformation effect of coal skeleton may also have considerable influence upon CBM flow. Although there are a number of CBM reservoir simulators that have been available for many years, to our knowledge, almost commercial-scale CBM simulator have not provided the features of N-D flow and coal skeleton deformation. In this presentation, a coupled flow model in CBM reservoir, accounting for N-D flow effect and coal skeleton deformation effect, was presented. The mathematical model was numerical solved by differential discrete and the implicit format treatment method. Based on our in-house gas-water simulator developed before, a simple coupled flow simulator in CBM reservoirs was developed. The technique uses an explicit algorithm to couple CBM flow and the changes of porosity and permeability of coal seams where flow calculations are performed every time step and the changes of porosity and permeability of coal seams are calculated only during selected time steps. Sample simulations are conducted to compare with the differences in influence of N-D flow effect and the coal skeleton deformation effect upon CBM production behavior. The results indicted the decreased in coal seams porosity and permeability can reduce the CBM rate and recovery much than N-D flow effect. Unfortunately, porosity and permeability of coal seams are constant in almost CBM simulations, as often assumed. The work recommended the alteration of coal seams porosity and permeability should be considered globally to correctly predict the CBM rate and recovery.IntroductionCoal seams are characteristic of two distinct porosity systems: macropores and micropores, similar to fracture systems and matrix systems for fractured hydrocarbon reservoirs and fluid transport undergone complex processes, i.e., desorption, diffusion and percolation flow, which making the mathematical description of gas flow in coal seams a relatively complex problem and analytical solution to the coalbed gas transport problem being also new challenging. In one case, since coal is relatively impermeable, any coalbed methane (CBM) recovered usually must flow through existing fracture systems helping increase the flow rate of CBM, which may induce CBM nondarcy (N-D) flow when high CBM rate. In the other case, coalbed methane production from coal seams decreases fluid pressure and increases the effective overburden load on porous reservoir rocks. Reservoir rocks are considered to be stress-sensitive if their fluid-flow characteristics change substantially with changes in effective stresses. Therefore large rock deformations are observed for rocks with weak mechanical properties in stress-sensitive reservoirs. Rock deformations can affect permeability, porosity and pore compressibility, causing changes in reservoir productivity. Consequently, it becomes necessary in some cases to couple geomechanics and fluid flow models.Gas flow rate in macropores in coal seams is often so very high that Darcy's law can't accurately and inadequately describe fluid flow. For conventional single-phase gas reservoirs, Forchheimer was the first to modify Darcy's law to account for the increases in pressure drops observed beyond the predicted values1. Cornell and Katz2 then put forth the common equation used today, named by Forchheimer equation. There have been many names for ß3–9 in the equation. Many correlations have been proposed to estimate ß in porous media10–13. However, some literatures have proposed that the effect of liquid phase on non-Darcy gas flow through proppant packs cannot be characterized by Forchheimer correlation alone in two-phase flow14. Keywords: reservoir characterization, simulator, nd flow effect, zhuangzhi shu spe 91397, flow in porous media, case 2, coal seam, upstream oil & gas, fluid dynamics, porosity Subjects: Reservoir Characterization, Reservoir Fluid Dynamics, Flow in porous media This content is only available via PDF. 2004. Society of Petroleum Engineers You can access this article if you purchase or spend a download.