A Fully Coupled Gas–Water–Solids Mathematical Model for Vertical Well Drainage of Coalbed Methane

Chengwang Wang,Haifeng Zhao,Zhan Liu,Tengfei Wang,Gaojie Chen

DOI: https://doi.org/10.3390/en17061497

IF: 3.2

2024-03-22

Energies

Abstract:The coupling relationship between the deformation field, the diffusion field, and the seepage field is an important factor in fluid transport mechanisms in the long-term coalbed methane (CBM) exploitation process. A mathematical model of gas–water two-phase fluid–structure coupling in a double-porosity medium in coal reservoirs is established in this paper. Taking Hancheng Block, a typical production block in Qinshui Basin, as the geological background critical desorption pressure, reservoir permeability anisotropy is considered in the model. COMSOL Multiphysics (COMSOL_6.0) was used to create the model. The accuracy and rationality of the model were verified by comparing field production data with the results of the simulation. Using the simulation, the influence law of various reservoir geological characteristics parameters (Langmuir strain constant, ratio of critical desorption pressure to reservoir pressure of coal seam (CDPRP), elastic modulus, initial water saturation, Langmuir pressure, etc.) on CBM productivity, reservoir pressure, and permeability ratio was discussed, and a thorough analysis of the factors affecting productivity was obtained using the orthogonal test method. The findings of this study indicate that the change in permeability is the result of the superposition effect of many factors. Different stages of drainage have different primary regulating factors. Rock skeleton stress has a consequence on coal matrix permeability in the early drainage stage, and coal matrix shrinkage is primarily impacted in the later drainage stage. Besides the initial water saturation, other reservoir geological parameters (e.g., CDPRP, Langmuir volume, Langmuir strain constant, elastic modulus) have a strong relationship with productivity. When the value of coal geological parameters increases, the degree of productivity release is higher (as the initial water saturation increases, the production decreases correspondingly). Different coal and rock parameters have varying levels of impact on the drainage stage of CBM wells. The influences of the CDPRP, Langmuir volume, Langmuir strain constant, and elastic modulus on gas production are mainly concentrated in the initial and intermediate drainage stages and begin to fall off during the last drainage stage. Per the multi-factor analysis, the main coal–rock parameters affecting the productivity release are the Langmuir strain constant, followed by the CDPRP and other parameters. The analysis findings can offer theoretical guidance for CBM well selection and layer selection and enhance the block's overall CBM development level. The improved productivity prediction model for CBM, which is based on fluid–structure coupling theory, can offer a new technical benchmark for CBM well productivity prediction.

energy & fuels

What problem does this paper attempt to address?

The paper attempts to address the issue of fluid transport mechanisms in the process of coalbed methane (CBM) extraction, particularly the impact of the coupling relationship between deformation field, diffusion field, and seepage field on fluid transport during long-term extraction. Specifically, the paper establishes a mathematical model of gas-water two-phase flow-structure coupling in the CBM reservoir, considering factors such as the key desorption pressure and reservoir permeability anisotropy of the Hancheng block (a typical production block located in the Qinshui Basin). The model is established using COMSOL Multiphysics software and its accuracy and rationality are verified by comparing it with field production data.

The main objectives of the paper are:
1. **Establish a mathematical model**: Construct a comprehensive coupled gas-water-solid mathematical model to describe the fluid transport mechanisms during the drainage process of vertical well coalbed methane.
2. **Verify model accuracy**: Validate the accuracy and rationality of the model by comparing it with actual production data.
3. **Analyze influencing factors**: Explore the influence of various reservoir geological characteristic parameters (such as Langmuir strain constant, key desorption pressure to reservoir pressure ratio, elastic modulus, initial water saturation, Langmuir pressure, etc.) on coalbed methane production, reservoir pressure, and permeability ratio.
4. **Optimize development plan**: Provide theoretical guidance for the selection of coalbed methane wells and layer selection through multi-factor analysis, thereby improving the overall coalbed methane development level of the block.

Through these studies, the paper aims to provide new technical standards for productivity prediction of coalbed methane wells and theoretical support for the exploration and development of coalbed methane.