Abstract:A double-sided photonic crystal fiber (PCF) temperature and refractive index (RI) sensor based on surface plasmon resonance (SPR) is reported to simultaneously measure temperature and RI. An arc groove covered with gold is filled with chloroform for temperature detection. The D-shaped plane coated with silver is in direct contact with the analyte to provide the RI. Two independent channels distinguish temperature and RI changes, thus completely solving the cross-sensitivity problem. The sensing characteristics of the plane coating, arc coating, and inner ring coating are discussed. The influence of gold film closure on the optimum RI measurement range was identified, and the best sensing structure of chloroform as a temperature-sensitive material is obtained. The sensing characteristics of different types of metal films are investigated. It is concluded that the band separation may be achieved by plating gold film and silver film in the arc groove and D-plane, respectively. The influence of the central angle of the arc groove on the sensor characteristics was investigated. High-order resonance may be avoided at a 180° center angle. The influence of the thickness of the metal film on the sensitivity of the sensor is studied numerically, and the optimal coating thickness is 50 nm. This work simplifies the selection of the RI range of sensing materials and provides a new approach to solve the high-order resonance and band interference in SPR multi-parameter sensors.

Photonic crystal fiber refractive index temperature sensor based on double spherical cascade

A novel temperature insensitive refractive index sensor based on dual photonic crystal fiber

Experimental measurement of the temperature-birefringence characteristics of birefringent photonic crystal fiber filled with ethanol

High Sensitivity Temperature Sensor with an Avoided-Crossing Based Selective-Filling High Birefringent Photonic Crystal Fiber Sagnac Interferometer.

Double U-groove temperature and refractive index photonic crystal fiber sensor based on surface plasmon resonance

Two-core photonic crystal fiber with selective liquid infiltration in the central air hole for temperature sensing

A Highly Sensitive Photonic Crystal Fiber Temperature Sensor Based on Sagnac Interferometer with Full Liquid Filling

Side-coupled Nanoscale Photonic Crystal Structure with High-Q and High-Stability for Simultaneous Refractive Index and Temperature Sensing

Optical fiber temperature sensor with Vernier effect formed by Mach–Zehnder interferometer cascaded Sagnac interferometer based on Hollow-core photonic crystal fiber

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

High-sensitivity refractive index sensor with cascaded dual-core photonic crystal fiber based on vernier effect

High-sensitivity photonic crystal fiber sensor based on surface plasmon resonance

Sagnac ring and photonic crystal fiber structure refractive index sensor with high birefringence and low temperature sensitivity

Photonic Crystal Fibre Based High Temperature Sensor with Three-Beam Path Interference

A Photonic Crystal Fiber Temperature Sensor Based on Forward Stimulated Fluorescence Emission

Simultaneous measurement of refractive-index and temperature with high sensitivity by combined use of long-period grating and defect cavity in photonic crystal fibers

Double-sided photonic crystal fiber (PCF) temperature and refractive index (RI) sensor based on surface plasmon resonance (SPR)

Highly sensitive dual-function sensor for refractive index and temperature using D-shaped microchannel photonic crystal fiber

Temperature Sensor Based on an Isopropanol-Sealed Photonic Crystal Fiber In-Line Interferometer with Enhanced Refractive Index Sensitivity

Thin-Core Fiber Sandwiched Photonic Crystal Fiber Modal Interferometer for Temperature and Refractive Index Sensing

Improving Temperature-Sensing Performance of Photonic Crystal Fiber via External Metal-Coated Trapezoidal-Shaped Surface