On the Simulative Experimental Study of Mechanical Properties of Stratified Rock Mass

Fu Xiao-min

Abstract:It is a key problem to be solved for large-scale rock engineering demonstration and design such as hydropower to understand the deformation and strength characteristics of stratified rock-mass,and to select its deformation and strength parameters.So,the deformation and strength characteristics of stratified rock-mass were studied based on simulative experimental data,and relations among the deformation modulus and the strength of simulative sample and joint number contained in the sample,inclination angle between axial stress and joint plane and confining pressure were obtained.Results show that when the inclination angle between the maximum principal stress and the joint plane σ1 increases from 0° to 90°,obvious difference in sample's stress-strain curve exists;its deformation modulus follows the tendency as a whole from bigger to smaller at first,then from smaller to bigger later;its strength changes as circular function.When the inclination angle equals to 0°,75° and 90° respectively,the sample's break property is basically not affected by joint plane.When the inclination angle does not equal to 0°,75° and 90° respectively,or the sample contains more than 1 joint,the break characteristics are affected seriously by the joint plane.Most parts of break plane grow along the joint and form break plane in same inclination direction.When break plane crosses through the layer between joint planes,a shear-expanding break belt forms,and its width is affected by the angle σ1 and joint number contained in the sample.

Geology,Engineering