Mechanical failure analysis during direct shear of double-joint rock mass

Feng Jiang,Gang Wang,Peng He,Bin Hou,Shu-bo Zhang,Shang-qu Sun,Cheng-cheng Zheng,Yue Wu

DOI: https://doi.org/10.1007/s10064-022-02930-6

IF: 4.2

2022-09-13

Bulletin of Engineering Geology and the Environment

Abstract:This study investigated the shear performance and failure mechanism of a complicated jointed rock mass by simulating the compression and shear of a layered jointed rock mass through the global insertion of a zero-thickness cohesive element. The feasibility of the model was confirmed through the comparison between the results of the indoor shear test and numerical simulation. Then, we studied the macro- and mesoscopic mechanical properties of jointed rock mass from the aspects of deformation and failure characteristics and shear strength variation. The major findings of this study are as follows. First, the stress concentration and shear failure of double-joint layered rock mass occur initially in the interlayer. The double-joint rock mass in the shear process suffers from not only the slip failure of the joint plane but also the brittle failure of the interlayer, which complicates the stress state of double-joint rock mass. Second, the peak shear strength of double-joint rock mass is positively correlated with the normal load, while the change in the shear performance of the multijoint rock mass shows little relation with the roughness of the joint plane. Therefore, more attention should be given to the interlayer material strength during actual construction. During construction around a layered jointed rock mass, the confining pressure should be observed first, especially in areas with high ground stress, and the layered jointed rock mass should be reinforced in time. This study provides theoretical guidance and a scientific basis for tunnel excavation and support optimization in complex layered jointed rock masses.

engineering, environmental,geosciences, multidisciplinary, geological

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the mechanical failure analysis of complex jointed rock masses during direct shearing. Specifically, the research aims to explore the shear properties and failure mechanisms of layered jointed rock masses by simulating their compression and shearing. The research focuses on:

1. **Stress concentration and shear failure during the shearing process**: The study found that the shear failure of double - jointed layered rock masses first occurs between the layers. During the shearing process, double - jointed rock masses will not only experience slip failure on the joint surfaces but also brittle failure between the layers, which makes the stress state of double - jointed rock masses more complex.

2. **Relationship between peak shear strength and normal load**: The study found that the peak shear strength of double - jointed rock masses is positively correlated with the normal load, while the change in the shear properties of multi - jointed rock masses has little relationship with the roughness of the joint surfaces. Therefore, special attention should be paid to the strength of the inter - layer materials in actual construction.

3. **Macro - and meso - mechanical properties**: The study explored the macro - and meso - mechanical properties of jointed rock masses in terms of deformation and failure characteristics and changes in shear strength.

4. **Theoretical guidance and scientific basis**: The research results provide theoretical guidance and scientific basis for tunnel excavation and support optimization, especially in complex layered jointed rock masses.

Through laboratory tests and numerical simulations, the research verified the feasibility of the model and analyzed in detail the mechanical behaviors and failure modes of jointed rock masses under different conditions. These research results are of great significance for the stability and safety of geological engineering projects.