Abstract:The concept of quality in laboratory medicine has many facets, but it is certainly difficult to discuss unless specifications for quality are set. Prior to the 5th Symposium Cutting Edge of Laboratory Medicine in Europe (CELME) held in Prague (October 2023), which is dealt with in this special issue of Clinical Chemistry and Laboratory Medicine , three other conferences on setting analytical performance specifications (APS) in laboratory medicine were convened: the Aspen Conference on analytical goals in clinical chemistry in 1976 [1], the International Union of Pure and Applied Chemistry (IUPAC)-IFCC conference held in Stockholm in 1999 [2], and the 1st EFLM Strategic Conference held in Milan in November 2014 [3]. The two last conferences also resulted in consensus documents [4, 5]. In the 2014 EFLM Strategic Conference, models to set APS were discussed and agreed [5]. A summary of the outcomes from that conference is presented in this issue along with a discussion of the anticipated role and responsibilities of the various stakeholders [6]. Particularly, pressure from the laboratory professionals are considered crucial for contributing a quantum leap forward in the way of practicality of Milan consensus about APS, and an APS list supported by the professional bodies in the field should be welcomed for helping to identify the minority of tests that require an actual improvement [6]. The main intention with the 2023 CELME conference was to discuss each of the three models from the Milan conference and to see how the related concepts were developed since 2014. The conference, which title was "Analytical performance specifications: Moving from models to practical recommendations", sought to see if it was possible to offer approaches on how to make the applications of the models more concrete and practical. Participants in principle agreed that the three Milan models were good and covered the different alternatives to set APS: it was therefore deemed unnecessary to write a new "consensus document". Following the conference's introduction focusing on the background and expectation for the meeting, the conference was divided into three sessions about: (i) The role of APS in providing a suitable laboratory contribution to patient care; (ii) Further development and examples in the use of the three Milan models; and (iii) APS in different applications. The first important question to be addressed was: "what role – if any – does APS play in laboratory medicine, and thereby for patient outcomes, and in which scenarios do we need it". Important is knowledge about what the intended use is, who are the APS users as well as why, when, and where the in vitro diagnostic medical device (IVD-MD) will be used. Ensuring harmonized medical laboratory results is essential for patient care. In his presentation, Miller underlined the importance to establish a metrological traceability chain from the higher-order references to the result obtained on clinical samples [7]. In doing this, the combined measurement uncertainty (MU) for a patient result, derived from each measurement step across the entire calibration hierarchy, must fulfil an APS for the maximum allowable measurement uncertainty (MAU), defined using one of the three models described in the Milan consensus document. Miller observed that one of the major challenges in determining if MAU is fulfilled is correctly determining the contribution of the random MU (u Rw ) from an IVD-MD operating within an individual laboratory. Many of the current indications for estimating u Rw from internal quality control (IQC) data do not use a sufficiently representative time interval to capture all relevant sources of variability in measurement results. Consequently, underestimation of u Rw is possible and may compromise assessment of how well current IVD-MDs and their supporting calibration hierarchies meet the clinical needs [8]. Manufacturers need APS to determine the quality level of their IVD-MDs. They may differentiate between "required" APS, necessary to make the product viable, and "aspirational" APS, which they would like to meet if IVD-MDs need improvement. They would like, as many others at the CELME meeting, to have one agreed list where APS for all the different Milan models are presented. On the other hand, it would be vital to obtain a more exhaustive information on which APS model, if any, IVD manufacturers are applying for MU of calibrator assigned values in the validation of the IVD-MDs. A "reality check" on the significance of APS in the real-life context of laboratory work was presented by Ceriotti, based on a questionnaire circulated in Italy [9]. It was interesting to know that only 64 % of those familiar with the term APS used them in the daily practice. The state-of-the-art performance was used by 48 % of the surveyed participants to set APS, followed by the biological v -Abstract Truncated-

What the Milan conference has taught us about analytical performance specification model definition and measurand allocation

Analytical performance specifications – moving from models to practical recommendations

Applying the Milan models to setting analytical performance specifications – considering all the information

Strategies to define performance specifications in laboratory medicine: 3 years on from the Milan Strategic Conference

State-of-the-art model for derivation of analytical performance specifications: how to define the highest level of analytical performance technically achievable

Outcome-based analytical performance specifications: current status and future challenges

Criteria for assigning laboratory measurands to models for analytical performance specifications defined in the 1st EFLM Strategic Conference

How clinical laboratories select and use Analytical Performance Specifications (APS) in Italy

Setting analytical performance specifications based on outcome studies – is it possible?

Using analytical performance specifications in a medical laboratory

Definition and application of performance specifications for measurement uncertainty of 23 common laboratory tests: linking theory to daily practice

The role of analytical performance specifications in international guidelines and standards dealing with metrological traceability in laboratory medicine

Analytical performance specifications based on biological variation data – considerations, strengths and limitations

Issues in assessing analytical performance specifications in healthcare systems assembling multiple laboratories and measuring systems

Defining a roadmap for harmonizing quality indicators in Laboratory Medicine: a consensus statement on behalf of the IFCC Working Group “Laboratory Error and Patient Safety” and EFLM Task and Finish Group “Performance specifications for the extra-analytical phases”

Analytical Performance Specifications for Input Variables: Investigation of the Model of End-Stage Liver Disease

Optimizing Available Tools for Achieving Result Standardization: Value Added by Joint Committee on Traceability in Laboratory Medicine (JCTLM)

Analytical performance specifications for combined uncertainty budget in the implementation of metrological traceability

Assessing post-analytical phase harmonization in European laboratories: a survey promoted by the EFLM Working Group on Harmonization

Links between accuracy and effectiveness of laboratory medicine equipment: use of the EUnetHTA core model to compare two analyzers by measuring HbA1c

Benchmarking medical laboratory performance on a global scale