Abstract:Weakly filled structural planes are an important influence on the stability control of engineering rock mass. Weak fillings with different geometrical characteristics are randomly distributed in the natural rock mass. To investigate the dynamic mechanical response and fracture mechanism of granite containing both planar and circular weak filling, the Split Hopkinson Pressure Bar (SHPB) experimental system was used to conduct the dynamic impact test. In this paper, the dynamic mechanical properties, the fracture process, the energy evolution and the micro-morphological characteristics of the fragments are mainly analyzed. The results show that: (1) the dynamic uniaxial compressive strength (DUCS), peak strain, and deformation modulus are synergistically affected by the extension length ( L ) of planar filling and strain rate. The presence of planar weak filling leads to a decrease in strain rate dependence while weakening the specimens' DUCS, and improves the overall synergistic deformation capacity of the specimen. (2) Strain rate and L jointly affect the energy distribution and evolution characteristics of the specimen; L has an enhancement effect on the distribution of reflected energy and a weakening effect on the distribution of transmitted energy. The effect of L on the dissipation of energy is transformed by the strain rate. The strain rate and L are the dominant factors in the variability of stress waveform conversion. (3) At a low strain rate, L has a positive effect on the intensification of the degree of fragmentation, however, at a high strain rate, the effect is characterised by a shift between positive and negative. The degree of fragmentation has a strain rate effect. As L increases, L has a "negative effect" on the "strain rate effect" that affects the degree of fragmentation. (4) The degree of fragmentation of macroscopic fragments is closely related to the energy dissipation density, the relationship between the two appears as a logarithmic function change. The presence of weak filling does not significantly change the microscopic morphology of granite fragments. The loose and porous microstructure of gypsum is the main reason for the altered propagation characteristics of the stress waves.

Acoustic emission and breakage mechanism analysis on gypsum-filled granite specimens with varying notch dimensions under uniaxial compression testing

Rock joint filling breakage under three different instant loading conditions; physical test and PFC simulation

Cracking Behavior and Acoustic Emission Characteristics of Heterogeneous Granite with Double Pre-Existing Filled Flaws and a Circular Hole under Uniaxial Compression: Insights from Grain-Based Discrete Element Method Modeling

Uniaxial Compressive Behavior of Granite at High Strain Rates

Mechanical behavior and failure analysis of fracture-filled gneissic granite

Failure behaviors of fractured granite during loading and unloading under high confining pressure based on acoustic emission multi-parameter analysis

Dynamic mechanical response and fracture mechanism of granite with structural plane containing planar and circular filling simultaneously: The influence of extension length

Mechanical behaviour and spatial fracture characteristics of weakly filled granite with different diameters under uniaxial loading revealed by 3D DIC and AE monitoring

Investigations into size dependence on the behavior of rocks with a "V" notch and hole under uniaxial compression

Identification of Crack Development in Granite under Triaxial Compression Based on the Acoustic Emission Signal

Investigating the failure mechanism of X-shaped non-persistent joints under uniaxial loading: Experimental and numerical analysis

Experimental Study on Cracking Process and Fracture Properties of Granite under Mode I Loading by Acoustic Emission and Digital Image Correlation

Characteristic stress variation and microcrack evolution of granite subjected to uniaxial compression using acoustic emission methods

Failure Behaviors of Granitic Rocks Induced by Point/local Loads under Biaxial Compression Stress State

Experimental and simulation investigation on failure characteristic of granite considering the effect of intermediate principal stresses

Mechanical Properties and Failure Behaviour of Anchored Granite containing Two Filled Edge-Notched Fissures in Triaxial Compression

Experimental Investigation into Grain Size Effect on Failure Behavior and Nonlinear Time-Varying Acoustic Emission Series of Granite

Experimental research on the mechanical properties and energy transfer of fractured granite under triaxial loading

Effect of Notch Location on Flexural and Fracture Behaviors of UHPGC Notched Beam Based on Four-point Bending Test and Acoustic Emission Monitoring

Shear fracture behaviors and acoustic emission characteristics of granite with discontinuous joints under combinations of normal static loads and dynamic disturbances

Fracture analysis of three‐point bending notched granite beams under prepeak and postpeak cyclic loading by digital image correlation and acoustic emission techniques