Abstract:Measurements made on the interstitial microwave antennas used for hyperthermia cancer therapy indicate that the heating patterns vary with the insertion depths (defined as the distance from the antenna tip to air-tissue interface). The antennas are made of thin coaxial cables with a radiation gap or gaps on the outer conductor. The antennas are inserted into small polypropylene catheters implanted in the tumour volume. This type of antenna may be simulated as an asymmetric dipole with one arm being the tip section consisting of the expanded extension of the inner conductor, and the other arm being the section of the outer conductor from the gap to the insertion point (air-tissue interface). We use four of the antennas to form a 2 cm x 2 cm array. The antennas are positioned on the corners of a 2 cm square. Measurements on both single antennas and multi-antenna arrays show that the maximum heating is not stationary with position along the antenna when the depth of insertion is changed. This paper investigates the theoretical prediction of the changes in heating patterns of interstitial microwave antennas at different insertion depths. Each of the antennas in the array is simulated as an asymmetric dipole. The SAR (specific absorption rate) is computed by using the insulated dipole theory. The temperature distribution in absence of perfusion is obtained through a thermal simulation routine to convert the SAR pattern into the temperature pattern. Excellent qualitative agreement is found between the theoretical heating pattern and the measured pattern in a non-perfused phantom on a 2 cm x 2 antenna array. Since the insertion depths of the interstitial antennas are different from patient to patient, it is recommended that simulation of the heating be done before treatments, to confirm the delivery of power to the target region.

Compact Slot Microstrip Patch Antenna Loaded with Open Metal Cavity for Microwave Hyperthermia

A compact microwave patch applicator for hyperthermia treatment of cancer

A coaxial-slot antenna for invasive microwave hyperthermia therapy

Investigations on an Improved Interstitial Antenna Used for Microwave Hyperthermia and the Specific Absorption Rate Distribution Within Biological Tissues

The Nead-field-focused Microstrip Antenna Array Used In Microwave Hyperthermia

Compact Patch Antenna for Electromagnetic Interaction with Human Tissue at 434 MHz

Development of a High SAR Conformal Antenna for Hyperthermia Tumors Treatment

Nearly Spherical Ablation Zone with Minimally Invasive Microwave Ablation: Analysis and Experimental Characterization of a Tapered-Tip Symmetric Dipole Antenna

The comparison of the three coaxial-slot antenna for invasive microwave hyperthermia therapy

Design a metamaterial based applicator for hyperthermia cancer treatment

Microwave Ablation Antenna with Ablation Area Being A Flat Section

The Temperature Control for Cancer Thermotherapy Using Interstitial Microwave Antenna

Development of metasurface based hyperthermia lens applicator for heating of cancerous tissues

[Design and Implementation of an Improved Invasive Antenna for Microwave Hyperthermia].

Microwave Hyperthermia Technology Based on Near‐Field Focused Metasurfaces: Design and Implementation

Investigation of Miniaturized Radiators for Microwave Hyperthermia

Metamaterial based AMC backed archimedean spiral antenna for in-vitro microwave hyperthermia of skin cancer

Design of an Microwave Applicator Using for Tumor in Superficial Layer

Prediction of heating patterns of a microwave interstitial antenna array at various insertion depths

Corner T-slot antenna at 2.45 GHz for hyperthermia application

Non-Invasive Breast Cancer Thermotherapy Studies Using Conformal Microstrip Antennas