Abstract:Purpose: Magnetic resonance (MR) imaging is increasingly being utilized to visualize the 3D temperature distribution in patients during treatment with hyperthermia or thermal ablation therapy. The goal of this work is to lay the foundation for improving the localization of heat in tumors with an online focusing algorithm that uses MR images as feedback to iteratively steer and focus heat into the target. Methods: The algorithm iteratively updates the model that quantifies the relationship between the source (antenna) settings and resulting tissue temperature distribution. At each step in the iterative process, optimal settings of power and relative phase of each antenna are computed to maximize averaged tumor temperature in the model. The MR-measured thermal distribution is then used to update/correct the model. This iterative procedure is repeated until convergence, i.e. until the model prediction and MR thermal image are in agreement. A human thigh tumor model heated in a 140 MHz four-antenna cylindrical mini-annular phased array is used for numerical validation of the proposed algorithm. Numerically simulated temperatures are used during the iterative process as surrogates for MR thermal images. Gaussian white noise with a standard deviation of 0.3 degrees C and zero mean is added to simulate MRI measurement uncertainty. The algorithm is validated for cases where the source settings for the first iteration are based on erroneous models: (1) tissue property variability, (2) patient position mismatch, (3) a simple idealized patient model built from CT-based actual geometry, and (4) antenna excitation uncertainty due to load dependent impedance mismatch and antenna cross-coupling. Choices of starting heating vector are also validated. Results: The algorithm successfully steers and focuses a tumor when there is no antenna excitation uncertainty. Temperature is raised to > or = 43 degrees C for more than about 90% of tumor volume, accompanied by less than about 20% of normal tissue volume being raised to a temperature > or = 41 degrees C. However, when there is antenna excitation uncertainty, about 40% to 80% of normal tissue volume is raised to a temperature > or = 41 degrees C. No significant tumor heating improvement is observed in all simulations after about 25 iteration steps. Conclusions: A feedback control algorithm is presented and shown to be successful in iteratively improving the focus of tissue heating within a four-antenna cylindrical phased array hyperthermia applicator. This algorithm appears to be robust in the presence of errors in assumed tissue properties, including realistic deviations of tissue properties and patient position in applicator. Only moderate robustness was achieved in the presence of misaligned applicator/tumor positioning and antenna excitation errors resulting from load mismatch or antenna cross coupling.

Design of multi-modal antenna arrays for microwave hyperthermia and 1H/1⁹F MRI monitoring of drug release

The Nead-field-focused Microstrip Antenna Array Used In Microwave Hyperthermia

Design of 915 MHz Phased Conformal Antenna Array for Deep Tumor Hyperthermia Based on Realistic Breast Model and SAR Optimization

Advanced Radio Frequency Applicators for Thermal Magnetic Resonance Theranostics of Brain Tumors

Development of a High SAR Conformal Antenna for Hyperthermia Tumors Treatment

Prediction of heating patterns of a microwave interstitial antenna array at various insertion depths

Optimal Design of Focused Arrays for Microwave-Induced Hyperthermia

Design of Ultra-Wideband Phased Array Applicator for Breast Cancer Hyperthermia Therapy

Compact Patch Antenna for Electromagnetic Interaction with Human Tissue at 434 MHz

Nearly Spherical Ablation Zone with Minimally Invasive Microwave Ablation: Analysis and Experimental Characterization of a Tapered-Tip Symmetric Dipole Antenna

Non-Invasive Breast Cancer Thermotherapy Studies Using Conformal Microstrip Antennas

Improvement of Phased Antenna Array Applied in Focused Microwave Breast Hyperthermia

Investigations on an Improved Interstitial Antenna Used for Microwave Hyperthermia and the Specific Absorption Rate Distribution Within Biological Tissues

Microwave Hyperthermia of Brain Tumors: A 2D Assessment Parametric Numerical Study

Microwave Hyperthermia Technology Based on Near‐Field Focused Metasurfaces: Design and Implementation

Compact Slot Microstrip Patch Antenna Loaded with Open Metal Cavity for Microwave Hyperthermia

A coaxial-slot antenna for invasive microwave hyperthermia therapy

Design of miniatured MRI coils for MRI‐guided tumor diagnosis and hyperthermia therapy

Design a metamaterial based applicator for hyperthermia cancer treatment

FDTD Analysis to Electromagnetic Field under the Antennas Array for Hyperthermia Treatment of Breast Tumor

Online feedback focusing algorithm for hyperthermia cancer treatment