Abstract:As a flow display technique, the silk thread method can clearly show the state of the flow field. However, displaying the state of the flow field in industrial closed metal cavities is impossible, and results of the traditional silk thread method fail to present depth information. To address these limitations, we propose a display method based on γ-photon silk thread 3D imaging. Firstly, a flow field visualization experimental platform applicable for industrial closed metal cavity was designed. Then, aiming at the shortcomings of insufficient γ-photon scanning data and limited imaging quality in flow field visualization, an adaptive sinogram interpolation-iterative filtering reconstruction algorithm was proposed to expand the data via the adaptive interpolation processing of the sinogram in image reconstruction. Beltrami filtering was also embedded in the iterative algorithm to effectively reduce noise and artifacts in the imaging image. Finally, the internal flow field inspection of the NACA0018 airfoil and the industrial confinement turbine were used as examples to visualise the wing upper surface flow and turbine blade passage secondary flow, respectively, and the results were consistent with those of the numerical simulation analysis. As the angle of attack of the wing increased, laminar flow separation occurred, and the silk thread structure state changed to the point where the aircraft stalled. After the imaging map analysis, the stall angle ranged between (15 ° ,19 ° ), which is consistent with the simulation results. In the turbine blade passage secondary flow detection, the imaging map formed a horseshoe vortex with airflow separation at the central saddle point and silk threads clearly presenting the structural state of the flow field along different directions.

Research on airfoil surface flow structure testing based on Tuft velocity measurement method

Measuring Flow Velocity Distribution in Microchannels Using Molecular Tracers

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Characterization of Luminescent Mini-Tufts in Quantitative Flow Visualization Experiments: Surface Flow Analysis and Modelization

Flowrate measurement of air-water two-phase flow using an Electrical Resistance Tomography sensor and a Venturi meter

Study on the application of 3D imaging based on the γ-photon silk thread method for visualisation and detection of flow fields

Applications of fluorescence-oil-flow visualization technique in hypersonic wind tunnel test

Experimental Investigation of the Flow Structure over a Delta Wing Via Flow Visualization Methods

Flow Visualization and Transient Behavior Analysis of Luminescent Mini-Tufts after a Backward-Facing Step

Abstract Submitted for the DFD09 Meeting of The American Physical Society Flow Velocity Profile in a Nanocapillary

Investigation on Visualization Test Methods for Flow Field Downstream Spacer Grids

Digitalization and Quantitative Flow Visualization of Surrounding Flow over a Specially-Shaped Column-Frame by Luminescent Mini-Tufts Method

Visualization Study on Vortex Structure over an Airfoil Using Planar Laser Induced Fluorescence

Fiber-optic Integrated Aerodynamic Three-Hole Vector Probe for High-Velocity Flow Field Measurement

Measurement of Liquid Flow Rate among the Annular Flow in Vertical Tee Junction

Microscopic Visualized Measurement for Water Flow Rate in Microchannel

Aeroacoustic Measurement of 30P30N High-Lift Configuration in the Test Section with Kevlar Cloth and Perforated Plate

Aero-optical Evaluation Method for High Speed Flow

An Experimental Study of Flow Around a Bio-Inspired Airfoil at Reynolds Number 2.0×103

Multi-beam Interferometric Rayleigh Scattering Technique for Simultaneous 2-D Quantitative Measurement of Multi-Parameters in High Speed Flow Field

PARTICLE-IMAGING VELOCIMETRY AND PRESSURE MEASUREMENTS OF THE TURBULENT FLOWS INSIDE THE INTAKE DUCT