Abstract:Interfacial passivation and energy level alignment regulation at perovskite and charge transport layer interface are urgently desirable for constructing efficient and stable self‐powered perovskite photodetectors. Herein, a modified additive‐containing antisolvent strategy that not only facilitates high quality perovskite film formation but also modulates energy level alignment at interface is developed to improve the photoresponse and stability of perovskite photodetectors. Specifically, poly(3‐hexylthiophene) (P3HT) is introduced as functional additive into the antisolvent chlorobenzene. P3HT molecules penetrate along perovskite grain boundaries to fill the pinholes and passivate Pb2+ defects. Furthermore, the valence band maximum of the surface of the perovskite layer is modulated to form a favorable band energy alignment with the hole transport layer (HTL). The suppressed carrier recombination at the perovskite/HTL interface results in reduced noise current and improved photocurrent. Finally, the optimized device achieves a responsivity of 0.41 A W‐1, a detectivity of 0.61 × 1012 Jones at 700 nm, and a linear dynamic response range of 118 dB without external bias. In addition, the unpackaged device still maintains 78% of initial performance after 720 h under ambient conditions, indicating its superior stability compared with the original device. A modified additive‐containing antisolvent strategy is proposed to form a poly(3‐hexylthiophene) (P3HT)/perovskite bulk heterojunction for self‐powered photodetectors, in which P3HT exists on the surface of the perovskite and the grain boundary. The introduction of P3HT not only passivates the interfacial defects, but also realizes a favorable band energy alignment at the interface to inhibit charge recombination, leading to enhanced performance and stability.

Passivation of 1D@3D perovskite ferroelectric film with hydrophobic molecules for ferro-pyro-phototronic effect-based self-driven photodetector

Ferro-pyro-phototronic effect enhanced self-powered, flexible and ultra-stable photodetectors based on highly crystalized 1D/3D ferroelectric perovskite film

2D Ruddlesden-Popper perovskite ferroelectric film for high-performance, self-powered and ultra-stable UV photodetector boosted by ferro-pyro-phototronic effect and surface passivation

Two‐dimensionalization of 3D Perovskites for Passive Narrowband Photodetection

A Self‐Powered UV Photodetector with Ultrahigh Responsivity based on Two‐Dimensional Perovskite Ferroelectric Films with Mixed Spacer Cations

Interfacial Passivation and Energy Level Alignment Regulation for Self‐Powered Perovskite Photodetectors with Enhanced Performance and Stability

Ultrafast Photoexcitation Induced Passivation for Quasi‐2D Perovskite Photodetectors

Effective Piezo‐Phototronic Enhancement of Flexible Photodetectors Based on 2D Hybrid Perovskite Ferroelectric Single‐Crystalline Thin‐Films (Adv. Mater. 32/2021)

Ferro-Pyro-Phototronic Effect in Monocrystalline 2D Ferroelectric Perovskite for High-Sensitive, Self-Powered, and Stable Ultraviolet Photodetector

High performance self-powered photodetection with a low detection limit based on a two-dimensional organometallic perovskite ferroelectric

High‐Performance Self‐Powered Ultraviolet Photodetector based on Coupled Ferroelectric Depolarization Field and Heterojunction Built‐In Potential

Effective Piezo‐Phototronic Enhancement of Flexible Photodetectors Based on 2D Hybrid Perovskite Ferroelectric Single‐Crystalline Thin‐Films

Synergistic Effect of Ionic Liquid and Embedded QDs on 2D Ferroelectric Perovskite Films with Narrow Phase Distribution for Self-Powered and Broad-Band Photodetectors

A modulated heterojunction interface via ferroelectric P(VDF-TrFE) towards high performance quasi-2D perovskite self-powered photodetectors

Spectrally Selective Polarization-Sensitive Photodetection Based on a 1D Lead-Free Hybrid Perovskite Ferroelectric

Stable and broadband photodetectors based on 3D/2D perovskite heterostructures with surface passivation

Revealing photovoltaic behavior in 2D hybrid perovskite ferroelectric single-crystalline microwire arrays for self-powered photodetectors

Multifunctional Regioisomeric Passivation Strategy for Fabricating Self-Driving, High Detectivity All-Inorganic Perovskite Photodetectors.

High‐Performance Flexible Self‐Powered Photodetectors Utilizing Spontaneous Electron and Hole Separation in Quasi‐2D Halide Perovskites

A Photolithography-Free Fabrication Strategy for Perovskite Photodetector Array with High-Security Imaging Application

Pressure-Enhanced Vertical Orientation and Compositional Control of Ruddlesden-Popper Perovskites for Efficient and Stable Solar Cells and Self-Powered Photodetectors