Abstract:Background: Chlorophenols (CPs) constitute a group of organic pollutants that are introduced into the environment as a result of several man-made activities, such as uncontrolled use of pesticides and herbicides, and as byproducts in the paper pulp bleaching. Promising removal technologies of chlorinated aromatics consist in the application of advanced oxidation processes (AOPs) that can provide an almost total degradation of a variety of contaminants. Among these, wide application find Fenton systems based on generation of reactive species having a high oxidizing power, such as hydroxyl radical HO*. Our objective was that of determining the overall degradation efficiency of the model compound 2,4-dichlorophenol (DCP) by thermal Fenton-type oxidation systems with a view toward defining in more details relevant process parameters, the effect of reaction temperature and of co-catalyst Cu2+. Methods: Reaction conditions were similar to those generally adopted as optimal in many practical applications, i.e. pollutant/Fe2+ (as FeSO4) ratio ca. 20, Fe2+/Cu2+ (co-catalyst) 2:1, pH adjusted and controlled at pH 3, and H2O2 in excess (up to four-fold over the stoichiometric amount required for complete mineralization). Results and discussion: The results demonstrate that it is advantageous to carry out the reaction at a temperature markedly higher (70 degrees C) than ambient. The stepwise addition of H2O2 in aliquots yields an efficient transformation, while allowing a convenient control of the reaction exothermicity. Under these conditions, the essentially complete removal of the initial DCP is accomplished using just one equiv of H2O2 during 15 min; excess H2O2 (5 equivalents) yields extensive substrate mineralization. Also relevant, at 70 degrees C dechlorination of the initial DCP (and of derived reaction intermediates) is remarkably extensive (3-5% residual TOX), already with the addition of 1 equiv of H2O2. At the end of the reaction, IC and IC-MS analyses of the solution reveal that only low-molecular weight carboxylic acid (acetic, formic, oxalic, malonic, tartaric, etc.) contribute to the residual TOC. Conclusions: The whole of the results herein point to the advantage of performing the process at temperatures substantially higher than ambient (70 degrees C). Under the conditions adopted, almost complete degradation of the initial toxic compound can be achieved using hydrogen peroxide in fair excess (e.g., 3.5 equiv H2O2). Recommendations and outlook: In applying practical Fenton-type degradation systems to heavily polluted wastes, either for the pre-treatment of waters with a high COD value prior to biodegradation or for complete mineralization of pollutants, the set up of appropriate reaction conditions appears to be a key factor. Also, it is desirable to keep the concentration of iron salts within the lower limits in order to minimize the production and disposal of iron oxide sludges.

Destruction of 4-chlorophenol by the hydrogen-accelerated catalytic Fenton system enhanced by Pd/NH 2 -MIL-101(Cr)

Enhanced Conversion from H2O2 to 1O2 on Cu–N Centers: Investigation of Mechanisms and Application in Alkaline Wastewater Treatment

Accelerated iron valence cycling in Fenton system using activated hydrogen enhanced by MIL-100(Fe) modified by nano-Pd0 Particle

Hydrogen accelerated regeneration of FeII in Fenton reaction enhanced by Pd/MOF-808(Zr)

Selective Conversion of Organic Pollutant P-Chlorophenol to Formic Acid Using Zeolite Fenton Catalyst

Pd/MIL-100(Fe) as hydrogen activator for Fe III /Fe II cycle: Fenton removal of sulfamethazine

Covalent organic framework material as efficient adsorbent and H2-Accelerated catalytic Fenton catalyst for enhanced removal of sulfamethazine

Pd/UiO-66(Zr) as efficient catalyst material of hydrogen promoted fenton system for enhancing oxidation of sulfamethazine

Fenton-like Degradation of 2,4-Dichlorophenol Using Fe3O4 Magnetic Nanoparticles

Fenton-like Oxidation of 4-Chlorophenol Using H2O2 in Situ Generated by Zn-Fe-CNTs Composite.

Photocatalysis-self-Fenton System over Edge Covalently Modified G-C3n4 with High Mineralization of Persistent Organic Pollutants

Catalytic Hydrodechlorination of 4-Chlorophenol in an Aqueous Solution with Pd/Ni Catalyst and Formic Acid

Rapid oxidation of 4-cholorphenol in the iron-based Metal–Organic frameworks (MOFs)/H2O2 system: The ignored two-steps interfacial single-electron transfer

Pd 0 nanoparticles confined within the pores of UiO-66(Zr) for efficient Fenton-like catalysis

Magnetic Nanoscaled Fe3O4/CeO2 Composite As an Efficient Fenton-like Heterogeneous Catalyst for Degradation of 4-Chlorophenol.

Fe(III)-Doped g-C3N4 Mediated Peroxymonosulfate Activation for Selective Degradation of Phenolic Compounds via High-Valent Iron-Oxo Species

Efficient degradation of 2,4-DCP by bicarbonate-modified Fenton under near-neutral conditions

Practical applications of the Fenton reaction to the removal of chlorinated aromatic pollutants. Oxidative degradation of 2,4-dichlorophenol

Three-dimensional functional carbon nanotube architecture as a highly efficient and active indirect catalyst for degradation of 4-chlorophenol

Acceleration of Fe III /Fe II cycle enhanced by Pd/MOF‐808(Zr) composite in hydrogen promotion Fenton system for sulfamethazine elimination

The role of oxygen in the degradation of p-chlorophenol by Fenton system.