Abstract:With the increasing proportion of wind turbines in power grids, they are required to have capabilities of active and efficient virtual inertial response to maintain grid frequency stability. However, the virtual inertial control methods currently used in doubly-fed induction generator (DFIG) units suffer from a secondary frequency drop (SFD) problem. Although the SFD can be inhibited by reducing the active power support strength of the DFIG units during inertia response, it will undoubtedly weaken the virtual inertia of the units. Therefore, how to eliminate the SFD while increasing the virtual inertia of the units is a worthy issue for studying. To solve this issue, a wind-storage combined virtual inertial control system based on quantization and regulation decoupling of active power increments is proposed in this paper. First, by setting the parameters of a proportional–differential (P-D) algorithm, the total active power increments required for virtual inertial response are quantified at the DFIG level. Secondly, a curve-shifting method based on the rate of change of frequency is adopted to adjust the active power output of the DFIG units. Finally, a battery energy storage system (BESS) is used to compensate for the power shortages of the units according to the quantized value of the active power increments. Simulations show that the control method can not only eliminate SFD but also effectively increase the system's virtual inertia.

Active Power Allocation Method of Doubly Fed Induction Generators Based on Rotor Speed

Modeling and Control of Wind Turbine with Doubly Fed Induction Generator

Phase–amplitude Model for Doubly Fed Induction Generators

Frequency Support From Kinetic Energy of DFIG-Based Wind Turbines Considering Speed Limitation

Simulation of a Site-Specific Doubly-Fed Induction Generator (DFIG) for Wind Turbine Applications

Improved Vector Control of Brushless Doubly Fed Induction Generator under Unbalanced Grid Conditions for Offshore Wind Power Generation

Stator Voltage Oriented Variable-parameter Control Strategy for Wind Turbine Driven Doubly Fed Induction Generator

Coordinated Inertial Control Method of Doubly Fed Induction Generators and Battery Energy Storage System for Short-Term Frequency Support

Research on design and simulation experiment of virtual inertia controller for doubly fed induction generator

The Integrated Control Strategy for Primary Frequency Control of DFIGs Based on Virtual Inertia and Pitch Control

Wind-Storage Combined Virtual Inertial Control Based on Quantization and Regulation Decoupling of Active Power Increments

Study On A Virtual Inertia Compensation Strategy Of Wind-Storage System

Parameter Tuning of Doubly Fed Induction Generator Systems for Wind Turbines Based on Orthogonal Design and Particle Swarm Optimization

Coordinated Frequency Regulation by Doubly Fed Induction Generator-Based Wind Power Plants

Stability Enhancement of Power Systems with High DFIG-Wind Turbine Penetration Via Virtual Inertia Planning

System Frequency Stabilization Using Doubly Fed Induction Generators Based Wind Energy Conversion Systems

Data-Driven Virtual Inertia Control Method of Doubly Fed Wind Turbine

Hierarchical Control Strategy for DFIG-Based Wind Farm to Enhance the Frequency Stability

Inertia Control of the Grid Connected Doubly Fed Induction Generator Based Wind Farm with Drive-Train Torsion Active Damping

Optimized Active Power Control of DFIG Wind Farm

Magnitude and Frequency Control of Grid-Connected Doubly Fed Induction Generator Based on Synchronised Model for Wind Power Generation