Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Validating a finite element model for rigid aircraft pavement load transfer against full scale testing

Finite Element Modelling of Two-way RC Slabs with Varying Modelling Choices

Field Destructive Testing of a Reinforced Concrete Bridge Deck Slab

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

Systematical Calibration and Validation of Discrete Element Models for Fiber Reinforced Cement Treated Aggregates

Numerical Modeling of Geogrid-Reinforced Flexible Pavement and Corresponding Validation Using Large-Scale Tank Test

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Development of Equivalent Stationary Dynamic Loads for Moving Vehicular Loads Using Artificial Intelligence-Based Finite Element Model Updating

Analysis of the Load Stress of BFRP Continuously Reinforced Composite Pavement

A systematic review of structural design methods and nondestructive tests for airport pavements

RESEARCH ON APPLICATION OF FINITE ELEMENT METHOD TO ANALYZE LOAD TRANSFER EFFICIENCY ACCORDING TO DEFLECTION OF AIRPORT RIGID PAVEMENT

Mechanical Behavior of Stud Shear Connectors Embedded in Hfrc

Modeling to simulate inverted asphalt pavement testing: An emphasis on cracks in the semirigid subbase

Airport pavement design considering areal load distribution

Fatigue Models for Airfield Concrete Pavement: Literature Review and Discussion

Deformation Modelling of Instrumented Flexible Pavement Structure

Recalibration of Airport Pavement Structural Design System

Asphalt pavement structural competency during staged airfield runway construction strategy

A Finite Element Model for Simulating Stress Responses of Permeable Road Pavement

Dynamic response analysis of airport pavements during aircraft taxiing for evaluating pavement bearing capacity

Analysis of reflective cracking in asphalt overlaid jointed concrete airfield pavements using a 3D generalized finite element approach