Abstract:Lithium–sulfur (Li–S) batteries have higher theoretical capacity and higher energy density, so they are considered to be one of the most promising candidates for next-generation energy storage devices. However, electrolyte-soluble polysulfides cause a shuttle effect and lead to poor cycle stability. This is one of the main obstacles to the practical applications of LSB technology. To overcome this problem, here, we report polar Ni2P hollow microspheres, with multilayer nesting, as sulfur host materials. Specifically, the multilayer polar Ni2P can simultaneously act as a multilayer physical barrier and chemical adsorption material. In addition, the Ni2P microspheres serve as activation catalysts, accelerating the redox reaction kinetics. The above features allow the structure to effectively suppress the shuttle effect and improve the discharge capacity and cycle stability of LSB. For example, the three-dimensional printed Ni2 (3DP-Ni2) cathode can provide an initial capacity of 682 mAh/g, obtaining high cycle stability with low-capacity attenuation of 0.0072% per cycle for 400 cycles under 2C. Even when the sulfur loading is increased from 6.1 to 9.3 mg/cm2, this material still shows good capacity retention. This work inspires the design of multifunctional cathode materials and paves a new path for the development of Li–S batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c01580?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01580</a>.XRD spectra of NiO; CV curves of the 3DP-Ni2 and cathodes; charge and discharge curves with the 3DP-Ni2 and cathodes; cycling performance of and 3DP-Ni2 cathodes at 0.5C, 1C, and 2C; photograph of the pole piece; rheological properties of the printing ink; photograph of the 3D-printed sulfur cathodes and the simulated battery; XPS spectra of Ni 2p for Ni2P of Ni2P-Li2S6; Li2S6 symmetrical cell with the Ni2P electrode; minimum energy path and potential energy profiles for Li ion diffusion on the Ni2P (111) facet, (210) facet, (111) facet, and carbon black surface; and table of comparison of the performances at high sulfur loading conditions (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c01580/suppl_file/sc1c01580_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Customizing Multifunctional Sulfur Host Materials Via a General Anion‐Exchange Process with Metal–Organic Solid

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

A N-Rich porous carbon nanocube anchored with Co/Fe dual atoms: an efficient bifunctional catalytic host for Li–S batteries

All-in-One Sulfur Host: Smart Controls of Architecture and Composition for Accelerated Liquid-Solid Redox Conversion in Lithium-Sulfur Batteries

A hollow Co0.12Ni1.88S2/NiO heterostructure that synergistically facilitates lithium polysulfide adsorption and conversion for lithium-sulfur batteries

Porous NiCo 2 S 4 Nanoneedle Arrays with Highly Efficient Electrocatalysis Anchored on Carbon Cloths as Self-Supported Hosts for High-Loading Li–S Batteries

Nitrogen-doped Carbonaceous Scaffold Anchored with Cobalt Nanoparticles As Sulfur Host for Efficient Adsorption and Catalytic Conversion of Polysulfides in Lithium-Sulfur Batteries

Hierarchically porous, ultrathin N–doped carbon nanosheets embedded with highly dispersed cobalt nanoparticles as efficient sulfur host for stable lithium–sulfur batteries

Mesoporous N‐rich Carbon with Single‐Ni Atoms as a Multifunctional Sulfur Host for Li‐S Batteries

Multifunction Co-Nx species to manipulate polysulfides conversion kinetics toward highly efficient lithium-sulfur batteries

MOFs-derived integrated flower shaped porous carbon anchored with core-shell Ni-NiO nanoparticles as efficient multifunctional electrode for Li–S batteries

Incorporating Cobalt Nanoparticles in Nitrogen-Doped Mesoporous Carbon Spheres Through Composite Micelle Assembly for High-Performance Lithium-Sulfur Batteries

Co−Ni Binary‐Metal Oxide Coated with Porous Carbon Derived from Metal‐Organic Framework As Host of Nano‐Sulfur for Lithium‐Sulfur Batteries

Self-Supported Hierarchically Porous 3d Carbon Nanofiber Network Comprising Ni/Co/Nico2o4 Nanocrystals and Hollow N-Doped C Nanocages as Sulfur Host for Highly Reversible Li–S Batteries

Multishelled Ni 2 P Microspheres as Multifunctional Sulfur Host 3D-Printed Cathode Materials Ensuring High Areal Capacity of Lithium–Sulfur Batteries

Rational Construction of Sulfur-Deficient NiCo 2 S 4– x Hollow Microspheres as an Effective Polysulfide Immobilizer toward High-Performance Lithium/Sulfur Batteries

A Conductive Ni2P Nanoporous Composite with a 3D Structure Derived from a Metal-Organic Framework for Lithium-Sulfur Batteries

Precisely Designed Ultra‐Small CoP Nanoparticles‐decorated Hollow Carbon Nanospheres as Highly Efficient Host in Lithium‐Sulfur Batteries

Superhierarchical Cobalt-Embedded Nitrogen-Doped Porous Carbon Nanosheets As Two-in-One Hosts for High-Performance Lithium-Sulfur Batteries

Confined Co9S8 nanocrystals into N/S-Co-doped Carbon Nanofibers as A Chainmail-like Electrocatalyst for High-performance Lithium-Sulfur Batteries with High Sulfur Loading

NiCo Alloy-Decorated Nitrogen-Doped Carbon Double-Shelled Hollow Polyhedrons with Abundant Catalytic Active Sites to Accelerate Lithium Polysulfides Conversion