Abstract:<p>An understanding of progressive time-dependent deformation is essential for determining appropriate measures to ensure the long-term integrity of rock-masses surrounding engineering structures. We propose a 3D numerical model, that uses the Norton-Bailey creep law and a time-independent damage evolution law, to investigate the progressive time-dependent deformation and fracturing of brittle rock. The model considers material heterogeneity and the concept of mesoscopic renormalization at the mesoscale. The cooperative interaction between microcrack distribution and damage evolution leads to local material degeneration as a function of increasing time in the model. First, the input parameters for the model were calibrated and the model was validated using laboratory experiments. Numerical creep simulations were then performed for a range of constant stresses. Our model can accurately replicate the evolution of strain and strain rate as a function of time, the output of acoustic emission energy, and the emergence of a macroscopic failure plane seen in laboratory experiments. Our simulations also show that the minimum creep strain rate and the time-to-failure increase and decrease, respectively, as stress is increased, also seen in laboratory experiments. For example, increasing the differential stress by 10 MPa increased the minimum creep strain rate increased by an order of magnitude. Finally, we use the proposed 3D model to investigate the time-dependent stability of an engineering-scale rock slope containing faults at the Fushun West Open Pit coal mine. A small increase in fault-adjacent damage was observed after 40 days and, between 60 and 120 days, the damage on the side of the slope increased. After 140 days, the localized growth of the damaged elements split the slope into two segments, resulting in slope failure. Our 3D numerical model highlights potential slope instability in the Fushun West Open Pit coal mine and can be used to investigate slope stability in engineering projects worldwide.</p>

Simulation of cyclic slow-to-fast landslides based on the coupled creep and frictional slip model

Multiscale modelling of the seepage-induced failure of a soft rock slope

A Thermo-Poro-Mechanics Model Predicts the Transition from Creep to Rapid Movement of Large Landslides

Construction of 3D Creep Model of Landslide Slip-Surface Soil and Secondary Development Based on FLAC3D

Development of an SPH-based method to simulate the progressive failure of cohesive soil slope

Frictional Control on Accelerating Creep During the Slow‐To‐Fast Transition of Rainfall‐Induced Catastrophic Landslides

Slow-to-fast transition of giant creeping rockslides modulated by undrained loading in basal shear zones

Simulation of Liquefaction and Retrogressive Slope Failure in Loose Coarse-Grained Material

Modelling rainfall-induced landslides from initiation of instability to post-failure

A thermo-poro-mechanical model for catastrophic landslides under unsaturated conditions

Development Trend and Stability Analysis of Creep Landslide With Obvious Slip Zone Under Rainfall-Taking Xinchang Xiashan Basalt Slope as an Example

An Improved Model to Describe the Creep Behavior of Soft Soil

DISCRETE ELEMENT MODELING AND SIMULATION OF 3-DIMEN-SIONAL LARGE-SCALE LANDSLIDE-TAKING XINMOCUN LANDSLIDE AS AN EXAMPLE

Unsaturated creep behaviors and creep model of slip-surface soil of a landslide in Three Gorges Reservoir area, China

A novel creep-damage constitutive model of clay–gravel composite considering the effect of water content and saturation-undersaturation cycles and its engineering application

Simulation of large-displacement landslide by material point method

Failure process of saturated granite residual soil slope: a 3D viscoelastic-plastic finite element modeling approach with nonstationary parameter creep

A three-dimensional mesoscale model for progressive time-dependent deformation and fracturing of brittle rock with application to slope stability

Slope with Predetermined Shear Plane Stability Predictions under Cyclic Loading with Innovative Time Series Analysis by Mechanical Learning Approach

Dynamic Modeling of Meiping Landslide Process

Simulation of the failure and run-out processes of rotational–translational loess landslides using an SPH model considering strain softening