Abstract:On 24 June 2017, a rockslide-debris avalanche occurred in Xinmo Village, Maoxian County, Sichuan Province, China. The displaced materials traveled approximately 2.6 km and caused 83 casualties. Combined with the field investigation, seismic signal, and numerical simulation, the dynamic process and deposit characteristics of the Xinmo landslide were analyzed. Based on the Arias intensity and Hibert time–frequency analysis of the seismic signal, the Xinmo landslide is determined to have a total duration of 120 s and with three-stage dynamic processes, namely, the initial accelerating stage (50 s), erosion impact stage (50 s), and accumulation stage (20 s). Then, taking the field investigation results, the total duration, and kinetic parameters inverted from the seismic signal as criteria, the DAN3D (Dynamic Analysis of Landslides) was employed to reconstruct the dynamic process of the Xinmo landslide. The results show that the erosion and deposit depth distributions obtained from the simulation are in agreement with the pre- and post-landslide DEM (digital elevation model) data and field results. Further, the three-stage dynamic processes (40 s, 60 s, 20 s) obtained from the numerical simulation are also close to the seismic analysis results. In this study, the results of the field investigation and seismic analysis provide a more detailed set of inversion criteria for the numerical simulation work, which contributes to reconstructing the dynamic processes of the Xinmo landslide more accurately. Based on the approach of multi-source data collaboration in this paper, those landslides that lack direct observation data can be better understood and the numerical parameters used for landslide dynamics inversion are better calibrated, which can be applied to predict the runout behavior and disaster scope of potential landslides in the immediate area.

Dynamic Modeling of Meiping Landslide Process

Synthetic Study Method of Dynamic Deformation Process of Landslide

SPH-based Simulation of Flow Process of a Landslide at Hongao Landfill in China

Physically Based Modeling and Animation of Landslides with MPM

DISCRETE ELEMENT MODELING AND SIMULATION OF 3-DIMEN-SIONAL LARGE-SCALE LANDSLIDE-TAKING XINMOCUN LANDSLIDE AS AN EXAMPLE

Dynamic Process Analysis of the Xinmo Landslide Via Seismic Signal and Numerical Simulation

Dynamic Analysis of the High-Speed and Long-Runout Landslide Movement Process Based on the Discrete Element Method: A Case Study of the Shuicheng Landslide in Guizhou, China

A finite element numerical simulation of landslide dynamics in Shuping, Three Gorges area

Mechanisms of rainfall-induced landslides and interception dynamic response: a case study of the Ni changgou landslide in Shimian, China

Research on dynamic process of large-scale high-speed landslide disasters

Full Dynamic Process Simulation of Landslides Using a Combination of Limit Analysis and Savage–Hutter Model

DIGITAL SIMULATION MODEL OF LANDSLIDE MOTION PROCESS UNDER GIS SUPPORT

Numerical Modeling of the Xinmo Landslide from Progressive Movement to Sudden Failure

Some Considerations on the Use of Numerical Methods to Simulate Past Landslides and Possible New Failures: the Case of the Recent Xinmo Landslide (sichuan, China)

Combining Seismic Signal Dynamic Inversion and Numerical Modeling Improves Landslide Process Reconstruction

Three-dimensional distance potential discrete element method for the numerical simulation of landslides

Dynamic Simulation and Analysis of High-Speed and Long Run-Out Landslide Triggered by the Wenchuan Earthquake, China

Forecasting Landslides Via Three-Dimensional Discrete Element Modeling: Helong Landslide Case Study

Dynamic Simulation of Landslide Based on Thermo-Poro-elastic Approach.

Numerical Simulation of Landslide over Erodible Surface

Landslide Deformation Prediction and Automatic Warning by Coupling Machine Learning and Physical Models