Abstract:Environmental sanitation in food manufacturing plants promotes food safety and product microbial quality. However, the development of experimental models remains a challenge due to the complex nature of commercial cleaning processes, which include spraying water and sanitizer on equipment and structural surfaces within manufacturing space. Although simple in execution, the physical driving forces are difficult to simulate in a controlled laboratory environment. Here, we present a bench-scale bioreactor system which mimics the flow conditions in environmental sanitation programs. We applied computational fluid dynamic (CFD) simulations to obtain fluid flow parameters that better approximate and predict industrial outcomes. According to the CFD model, the local wall shear stress achieved on the target surface ranged from 0.015 to 5.00 Pa. Sanitation efficacy on six types of environmental surface materials (hydrophobicity, 57.59 to 88.61°; roughness, 2.2 to 11.9 μm) against two different microbial targets, the bacterial pathogen Listeria monocytogenes and Exophiala species spoilage fungi, were evaluated using the bench-scale bioreactor system. The relative reduction ranged from 0.0 to 0.82 for Exophiala spp., which corresponded to a 0.0 to 2.21 log CFU/coupon reduction, and the relative reduction ranged from 0.0 to 0.93 in L. monocytogenes which corresponded to a 0.0 to 6.19 log CFU/coupon reduction. Although most treatment parameters were considered statistically significant against either L. monocytogenes or Exophiala spp., contact time was ranked as the most important predictor for L. monocytogenes reduction. Shear stress contributed the most to Exophiala spp. removal on stainless steel and Buna-N rubber, while contact time was the most important factor on HDPE (high-density polyethylene), cement, and epoxy.IMPORTANCE Commercial food manufacturers commonly employ a single sanitation program that addresses both bacterial pathogen and fungal spoilage microbiota, despite the fact that the two microbial targets respond differently to various environmental sanitation conditions. Comparison of outcome-based clusters of treatment combinations may facilitate the development of compensatory sanitation regimes where longer contact time or greater force are applied so that lower sanitizer concentrations can be used. Determination of microbiological outcomes related to sanitation program efficacy against a panel of treatment conditions allows food processors to balance tradeoffs between quality and safety with cost and waste stream management, as appropriate for their facility.

Improving Cleaning Efficiency through the Measurement of Food Fouling Adhesive Strength

Optimization of temperature for effective cleaning with a novel cleaning rig: Influence of soil and surface types

Multi-length Scale Approach to Investigate Cleaning of Food-Derived Deposits Adhered to Hard Surfaces: Mixtures of Starch, Whey Protein, and Lard

The Influence of Surface Chemistry on the Kinetics and Thermodynamics of Bacterial Adhesion

Microbiological and chemical analyses of stainless steel and ceramics subjected to repeated soiling and cleaning treatments

The synergistic effect of enzymatic detergents on biofilm cleaning from different surfaces

Factors Affecting the Adhesion of Flour Particles to Stainless-steel Surfaces and Vacuum Dry-cleaning

Integrated model for the prediction of cleaning profiles inside an automatic dishwasher

Surface Charge Control for Zwitterionic Polymer Brushes: Tailoring Surface Properties to Antifouling Applications.

Investigation of the detergency properties of mixtures of biocides and nonionic surfactants using a new simplified hard surface cleaning method

Minimizing the environmental footprint in food production: A case study on the improvement of an industrial tank cleaning process through adaptive cleaning devices

All Treatment Parameters Affect Environmental Surface Sanitation Efficacy, but Their Relative Importance Depends on the Microbial Target

Cleaning Ability of Mixed Solutions of Sulfonated Fatty Acid Methyl Esters

Barnacle Larvae Exploring Surfaces with Variable Hydrophilicity: Influence of Morphology and Adhesion of "footprint" Proteins by AFM.

Evaluation of Enzymatic Cleaning on Food Processing Installations and Food Products Bacterial Microflora

Influence of Surface Roughness, Nanostructure, and Wetting on Bacterial Adhesion

A Comparative Study on Fouling and Cleaning Characteristics of Soy Protein Isolate (SPI)

Surface Energy of Food Contact Materials and Its Relation to Wheat Dough Adhesion

A New Spiral Potato Cleaner to Enhance the Removal of Impurities and Soil Clods in Potato Harvesting

Compatibility and Washing Performance of Compound Protease Detergent

Surface Fouling Characterization Methods for Polymeric Membranes Using a Short Experimental Study