Abstract:Abstract Conventional manufacturing techniques to fabricate microfluidic chips, such as soft lithography and hot embossing process, have limitations that include difficulty in preparing multiple-layered structures, cost- and labor-consuming fabrication process, and low productivity. Digital light processing (DLP) technology has recently emerged as a cost-efficient microfabrication approach for the 3D printing of microfluidic chips; however, the fabrication resolution for microchannels is still limited to sub-100 microns at best. Here, we developed an innovative DLP printing strategy for high resolution and scalable microchannel fabrication by dosing- and zoning-controlled vat photopolymerization (DZC-VPP). Specifically, we proposed a modified mathematical model to precisely predict the accumulated UV irradiance for resin photopolymerization, thereby providing guidance for the fabrication of microchannels with enhanced resolution. By fine-tuning the printing parameters, including optical irradiance, exposure time, projection region, and step distance, we can precisely tailor the penetration irradiance stemming from the photopolymerization of the neighboring resin layers, thereby preventing channel blockage due to UV overexposure or compromised bonding stability owing to insufficient resin curing. Remarkably, this strategy can allow the preparation of microchannels with cross-sectional dimensions of 20 μm × 20 μm using a commercial printer with a pixel size of 10 μm × 10 μm; this is significantly higher resolution than previous reports. In addition, this method can enable the scalable and biocompatible fabrication of microfluidic drop-maker units that can be used for cell encapsulation. In general, the current DZC-VPP method can enable major advances in precise and scalable microchannel fabrication and represents a significant step forward for widespread applications of microfluidics-based techniques in biomedical fields.

Micro and nanoscale 3D printing using optical pickup unit from a gaming console

Micro and nanoscale 3D printing using optical pickup unit from a gaming console

High-resolution 3D Nanoprinting Based on Two-Step Absorption Via an Integrated Fiber-Coupled Laser Diode.

Single-color Peripheral Photoinhibition Lithography of Nanophotonic Structures

Beyond 100 nm Resolution in 3D Laser Lithography: Post Processing Solutions

Fast Micron-Scale 3D Printing with a Resonant-Scanning Two-Photon Microscope

3D Printing Mesoscale Optical Components with a Low-Cost Resin Printer Integrated with a Fiber-Optic Taper

High-resolution low-cost LCD 3D printing of microfluidics

Light-sheet 3D microprinting via two-colour two-step absorption

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

High-resolution low-cost LCD 3D printing for microfluidics and organ-on-a-chip devices

Single-digit-micrometer-resolution continuous liquid interface production

Silicon-photonics-enabled chip-based 3D printer

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

3D Printing of Optical Lenses Assisted by Precision Spin Coating

Large volume nanoscale 3D printing: Nano-3DP

High-throughput 3D printing of customized imaging lens

Digital light processing 3D printing for microfluidic chips with enhanced resolution via dosing- and zoning-controlled vat photopolymerization

Creation of a Micro-Nanoworld with Photons

Laser Micro-Nano Three-Dimensional Printing

3D printing of optical materials: an investigation of the microscopic properties