Abstract:In this study, synthetic CaCO 3 materials were utilized as precursors for CaO-based CO 2 sorbents. The investigation examined how various operating parameters—such as synthesis temperature (ST), stirring rate (SR), and surfactant percentage (SP)—impact the properties of the adsorbents. Samples were firstly characterized by X-ray diffraction and Scanning Electron Microscopy (SEM), which revealed that the prevalence of calcite or aragonite crystal phases in the synthetic CaCO 3 precursors can be tuned by adequately choosing the dose of surfactant (Triton-X100®), so that it can be used as a crystal habit and growth modifier. The calcination process applied to the CaCO 3 precursors leads to the formation of partially sinterized cubic crystals of CaO, accompanied by minor quantities (< 5 %) of additional compounds like Ca(OH) 2 or CaSO 4 . Specific surface area (S BET ) and porosity were determined by measuring the N 2 adsorption isotherms. A CaCO 3 sample with an unprecedented value of S BET as large as 116 m 2 /g was prepared operating under optimal conditions. S BET and pore volumes were successfully correlated with the CO 2 uptake capacity of the samples. S BET is more influential for experiments carried out under diluted CO 2 atmosphere. When pure CO 2 is used, the influence of meso- and micropore volumes (V me and V mi ) is clearly predominant, which suggests that in this latter case diffusion through the porous texture of the samples plays a more remarkable role. A double-way approach through Response Surface Methodology (RSM) and the use of Artificial Neural Networks (ANNs) has been used to analyze the CO 2 uptake capacity of the samples. Within the operational interval, excellent results were obtained for pure and diluted CO 2 flow, and RSM and ANNs have demonstrated to be a very efficient tool to correlate the behavior of the CaO-based materials as CO 2 sorbents with the surface area and pore volumes of the samples. Valuable information on (i) the importance of the different factors under study; (ii) their influence on the surface and porosity of the CaO-derived sorbents; and (iii) the subsequent CO 2 capture performance of the sorbents has been obtained. The results suggest that four parameters have a statistically significant influence on CO 2 uptake. These parameters are SR, the square of SR, its interaction with SP, and the square of SP. Additionally, the study assessed the stability of the CaO-based sorbents over 11 consecutive calcination-carbonation cycles. By adequately choosing the synthesis strategy and conditions, an almost negligible shrinkage effect can be achieved, resulting in a more sustained uptake capacity throughout the cycles.

Valorization of Crab Shells as Potential Sorbent Materials for CO 2 Capture

Porosity and hydrophilicity modulated quaternary ammonium-based sorbents for CO<sub>2</sub> capture

Kinetic Analysis of an Anion Exchange Absorbent for Co2 Capture from Ambient Air

Unveiling the Porosity Effect of Superbase Ionic Liquid-Modified Carbon Sorbents in CO 2 Capture from Air

Crab shell-based hierarchical micro/meso-porous carbon as an efficient nano-adsorbent for CO2/CH4 separation: experiments and DFT modeling

Sustainable preparation of hierarchical porous carbon from discarded shells of crustaceans for efficient CO2 capture

Engineering Porous Organic Polymers for Carbon Dioxide Capture

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

CRAB SHELL: A POTENTIAL HIGH-EFFICIENCY AND LOW-COST ADSORBENT FOR DYE WASTEWATER

Resorcinol–formaldehyde Resin-Based Porous Carbon Spheres with High CO2 Capture Capacities

CO2adsorption on Crab Shell Derived Activated Carbons: Contribution of Micropores and Nitrogen-Containing Groups

The Advances of Adsorbents in the Field of CO_2 Capture

Enhancement of sintering resistance of CaO-based sorbents using industrial waste resources for Ca-looping in the cement industry

Production of Sustainable Adsorbents for CO2 Capture Applications from Food Biowastes

Porous materials with optimal adsorption thermodynamics and kinetics for CO2 separation

Biopolymeric Nanocomposites for CO2 Capture

Integrated experimental and theoretical studies for unravelling CO2 capture of dual function CeO2-CaO bio-based sorbents

Advances in Post‐Combustion CO 2 Capture by Physical Adsorption: From Materials Innovation to Separation Practice

Green Biobased Sorbents for CO2 Capture

A Novel Nanoporous Adsorbent for Pesticides Obtained from Biogenic Calcium Carbonate Derived from Waste Crab Shells

Exploring the role of surface and porosity in CO 2 capture by CaO-based adsorbents through response surface methodology (RSM) and artificial neural networks (ANN)