Abstract:Ammonia nitrogen removal from wastewaters has gained much attention in recent decades as a result of the environmental problems associated with discharge of excessive amounts of this critical nutrient including eutrophication of receiving waters, generation of offensive odours as a result of organism decay and complications associated with the disinfection of water supplies. While removal via biological processes represents the principal means by which a reduction in dissolved nitrogen concentrations is achieved, an electrochemical advanced oxidation process has been proposed as a potentially effective alternate means of removing ammonia from wastewaters with the removal associated with the in situ generation of oxidants (particularly active chlorine) at the anode. Here we describe the influence of key factors on the rate and extent of ammonia nitrogen removal in an electrochemical cell with a Ti/IrO2-RuO2 anode and Ti cathode. The rate of ammonia removal was found to be dependent on both current density and initial chloride concentration with ∼95% ammonia removed from a 20 mM Cl- solution within approximately 40 min at a current density of 3 mA cm-2, resulting in an energy consumption of 126 kWh kg-1 NH4+-N. Additionally, we show that by-products formation is effectively suppressed during the electrolysis process. A mechanistically-based kinetic model incorporating the key processes operating in the ammonia electro-oxidation process was developed with particular attention given to (i) anodic generation of active chlorine and other chloride-related by-products, (ii) active chlorine mediated ammonia oxidation. The results demonstrate that the electrochemical advanced oxidation process is a promising technology for treatment of ammonia-containing wastewaters with advantages including simplicity, safety and effectiveness.

Utilizing the immanent chloride ions in wastewater for reactive chlorine species photogeneration towards effective ammonia nitrogen removal

An efficient strategy for selective oxidation of ammonia nitrogen into N2 over BiOCl photocatalyst

Internal Electric Field Facilitates Facet-Dependent Photocatalytic Cl - Utilization on BiOCl in High-Salinity Wastewater for Ammonium Removal

ELECTROCHEMICAL TREATMENT OF RECIRCULATING AQUACULTURE WASTEWATER USING A Ti/RuO2-IrO2 ANODE FOR SYNERGETIC TOTAL AMMONIA NITROGEN AND NITRITE REMOVAL AND DISINFECTION

Facile ammonium oxidation to nitrogen gas in acid wastewater by in situ photogenerated chlorine radicals

Regulating the in situ generation of active chlorine species in a photoelectrochemical system for the efficient simultaneous removal of ammonia nitrogen and refractory pharmaceuticals

Efficient ammonia removal and toxic chlorate control by using BiVO4/WO3 heterojunction photoanode in a self-driven PEC-chlorine system

Enhanced ammonia oxidation by a photoelectrocatalysis‐chlorine system: The role of ClO• and free chlorine

Electro-enhanced chlorine-mediated ammonium nitrogen removal triggered by an optimized catalytic anode for sustainable saline wastewater treatment

Experimental and theoretical insights into the RCS-Involved electro-catalytic transformation of 4-nitrophenol

Efficient photocatalytic chlorine production on bismuth oxychloride in chloride solution

Degradation of 4-chlorophenol through in situ generation of reactive chlorine species in a Zn 2 CoO x electrocatalytic system

Boosting Ammonium Oxidation in Wastewater by the BiOCl-Functionalized Anode

Synergistic catalysis of TiO2/WO3 photoanode and Sb-SnO2 electrode with highly efficient ClO• generation for urine treatment

Selective oxidation of ammonia to dinitrogen gas by facile Co<SUP>2+</SUP>/PMS/ chloridion process through reactive chlorine radicals

Active chlorine mediated ammonia oxidation revisited: Reaction mechanism, kinetic modelling and implications

Construction of bismuth-based porous carbon models by 3D printing technology for light-enhanced removal of chloride ions in wastewater

Elimination of pesticide from high salinity wastewater by electrochlorination process: Active chlorine species and scale-up performance

Efficient oxidation of ammonium to nitrogen gas via accelerated ClO• generation at TiO 2 /Ru-IrO 2 bifacial electrode in a UV-driven photoelectrochemical system

Enhanced •Cl generation by introducing electrophilic Cu(II) in Co 3 O 4 anode for efficient total nitrogen removal with hydrogen recovery in urine treatment

Chloride removal from sewage using bismuth trioxide: Characterization and optimization by response surface methodology (RSM)