Abstract:Photoelectrocatalytic (PEC) process combining the merits of photocatalysis and electrocatalysis is considered as a promising ammonia oxidation technology for water treatment. However, some key issues, such as the limited in situ generation of oxidants on photoanode, slow mass transfer problem and generation of nitrate/nitrite by- -products hinder the further application of PEC process in the treatment of ammonia pollutant. In this study, the graphite felt (GF) cathodes modified by different transition metals (Ni, Fe, Mn, Co, Cu) were screened by physicochemical and photoelectrochemical characterizations. The results show that the Ni-GF cathode with more Ni0 uniformly distributed on the GF surface had the best electrocatalytic activity to generate H2O2. The PEC system composed of 10.0 wt% Ni-GF cathode and optimized titania nanotubes (TNTs) photoanode selectively converted about 96.1% ammonia to N2 within 90 min. Compared with the single TNTs photoanode system, the ammonia oxidation reaction rate constant of the synergistic PEC oxidation system was increased by about two times, which demonstrated the role of the oxidants simultaneously generated on both anode and cathode. The in situ generated reactive oxygen-based oxidants and chlorine-based oxidants interacted together, and ClO center dot acted a leading role in the ammonia oxidation which were confirmed by quenching and probe experiments. In addition, the contributions of center dot OH and ClO center dot were significantly improved in the synergistic PEC oxidation system, compared with the single TNTs photoanode system. Furthermore, the nitrate by-products generated by the ammonia oxidation were further reduced on the Ni-GF cathode. The large amount of active chlorine and active oxygen generated on the electrode diffused into the bulk, effectively overcoming the mass transfer limitation of direct oxidation. Therefore, the developed TNTs photoanode/Ni-GF cathode system can continuously and effi-ciently convert ammonia to N2 without the formation of nitrate/nitrite by-products.

Regulating the in situ generation of active chlorine species in a photoelectrochemical system for the efficient simultaneous removal of ammonia nitrogen and refractory pharmaceuticals

Efficient ammonia removal and toxic chlorate control by using BiVO4/WO3 heterojunction photoanode in a self-driven PEC-chlorine system

Efficient urine removal, simultaneous elimination of emerging contaminants, and control of toxic chlorate in a photoelectrocatalytic-chlorine system

Enhanced ammonia oxidation by a photoelectrocatalysis‐chlorine system: The role of ClO• and free chlorine

Utilizing the immanent chloride ions in wastewater for reactive chlorine species photogeneration towards effective ammonia nitrogen removal

Integration of Ag3PO4/WO3 photoanode with bifunctional CuO cathode exhibiting photocatalytic and peroxidase-mimetic properties for nanozyme-coupled photoelectrocatalytic degradation of persistent pollutant

Efficient oxidation of ammonium to nitrogen gas via accelerated ClO• generation at TiO 2 /Ru-IrO 2 bifacial electrode in a UV-driven photoelectrochemical system

Synergistic catalysis of TiO2/WO3 photoanode and Sb-SnO2 electrode with highly efficient ClO• generation for urine treatment

Efficient purification of a nitrate and chlorate mixture in water via photoredox activated intermediate coupling-decoupling pathway

Treatment of hazardous organic amine wastewater and simultaneous electricity generation using photocatalytic fuel cell based on TiO2/WO3 photoanode and Cu nanowires cathode

Synergistic degradation of formaldehyde and chlorophenols in N-CQDs/BiOBr photocathode-coupled microbial fuel cells and the enhancement of power production efficiency

Boosting Generation of Reactive Oxygen and Chlorine Species on Tnt Photoanode and Ni/Graphite Fiber Cathode Towards Efficient Oxidation of Ammonia Wastewater

Inhibition of inorganic chlorinated byproducts formation during electrooxidation treatment of saline phenolic wastewater via synergistic cathodic generation of H2O2

Elimination of pesticide from high salinity wastewater by electrochlorination process: Active chlorine species and scale-up performance

Process Optimization of Electrochemical Treatment of COD and Total Nitrogen Containing Wastewater

Unexpected Chloride-Triggered Organics Removal in the Zirconium Oxide Activated Peroxymonosulfate System

Chlorine-enhanced photocatalytic degradation of PPCPs over Bi2MoO6/(BiO)2CO3 heterostructures

A visible-light-driven photocatalytic fuel cell/peroxymonosulfate (PFC/PMS) system using blue TiO2 nanotube arrays (TNA) anode and Cu-Co-WO3 cathode for enhanced oxidation of organic pollutant and ammonium nitrogen in real seawater

Photoelectrochemical integrated treatment of textile wastewater by prepared optimized Ni-doped PbS quantum dots on WO 3 /BiVO 4 along with H 2 production

Simultaneous integration of on-site H2O2 production and in-situ activated fenton-like reaction over Cu-C3N4-on-Mo-BiVO4 photoanodes for rapid pollutant removal

Design of BiOCl/WO3@Polyaniline Organic–Inorganic Nanocomposite Photocatalyst for the Efficient Decontamination of 2-Chlorophenol from Wastewater