Solvent‐Assisted Surface Modification Using Metallocene‐Based Molecules for High‐Efficiency Perovskite/Silicon Tandem Solar Cells
Chang Wang,Shibo Wang,Wei Shi,Zhaojun Su,Kun Gao,Fengxian Cao,Dacheng Xu,Xinliang Lou,Xinyu Wang,Kun Li,WenHao Li,Xiang Chen,Haicheng Li,Wenhao Li,Anling Tong,Yongtian Xiao,Jiang Liu,Xiaohong Zhang,Juan Yang,Xinbo Yang
DOI: https://doi.org/10.1002/aenm.202401039
IF: 27.8
2024-05-24
Advanced Energy Materials
Abstract:An approach is proposed to modify perovskite surface utilizing mixed solvents and metallocene materials. The mixed solvent efficiently exposes trap defects on the perovskite surface, while the high electronegativity metallocene material effectively passivates these defects, significantly enhancing carrier transport efficiency. A certified PCE exceeding 30% is obtain on perovskite/silicon tandem solar cells. The presence of a high density of defects at the perovskite/electron transport layer (ETL) interface results in significant nonradiative recombination losses, thus impeding the efficiency enhancement of perovskite/silicon tandem solar cells (TSCs). In this investigation, a metallocene‐based molecule, cobalt (III) dichlorophene hexafluorophosphate (CcPF6), is employed for perovskite surface passivation. To maximize its efficacy, the molecule is dissolved in a mixed solvent of acetonitrile and chlorobenzene, leading to the reconstruction of the perovskite surface and effective passivation of surface defects. This modification strategy substantially enhances the overall efficiency of perovskite/silicon tandem solar cells by mitigating the issue of low fill factor resulting from non‐uniform coating of the top perovskite layer on the textured silicon bottom cell. Leveraging a double‐sided textured silicon heterojunction (HJT) bottom cell, a certified power conversion efficiency (PCE) of 30.43% for a monolithic perovskite/silicon TSC (1.00 cm2) is achieved, featuring an open‐circuit voltage (Voc) of 1.93 V and a fill factor (FF) of 78.43%. After storage in the drying cabinet (5% humidity at 20 °C) for 1000 h, the device retains 94.27% of its initial performance.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels