Abstract:With increasing energy requirements and limited fuel resources, finding cheap renewable sources is essential. The objective of our current economic study is to enhance biodiesel production from the Penicillium commune, NRC 2016. Four mutagenic agents were used to improve the lipid production from P. commune NRC 2016: gamma radiation, ethyl methanesulfonate (EMS), ethidium bromide (Et Br), and sodium azide (NaN 3 ). The Inter-Simple-Simplece Repeats molecular (ISSR) marker was used to compare the wild type of P. commune NRC 2016 and the resulting mutants. The results showed a major difference between the wild type and its mutants. Response surface methodology was used to optimize the culture conditions for lipid production by P. commune NRC 2016, and the induced mutants used hydrolysate that was produced from bagasse using Bacillus cereus 3SME. The maximum lipid content (g/l) for P. commune NRC 2016, P. commune NRC 2016–1, P. commune NRC 2016–2, and P. commune NRC 2016–3 were 2.01, 2.55, 1.71, and 2.27, respectively. Gas chromatographic analysis was used for biodiesel produced from P. commune NRC 2016 wild type, and its mutants were mainly C16–C18, which is suitable for transesterification. The physical properties, such as density, viscosity, cloud point, pour point, and cetane number, of the biodiesel from P. commune NRC 2016 and its mutants were similar to those of standard biodiesel and could be applied on a large scale. The biodiesels produced through P. commune NRC 2016 and its mutants can be utilized on a broad scale as eco-friendly products obtained from a low-cost carbon source.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to improve the ability to produce biodiesel by **Penicillium commune NRC 2016** and its mutants through optimizing fermentation conditions and using mutation techniques. Specifically, the researchers used the Response Surface Methodology (RSM) to optimize the culture conditions in order to increase lipid production, and further induced mutations through different types of mutagens (such as gamma rays, ethyl methanesulfonate (EMS), ethidium bromide (Et Br) and sodium azide (NaN3)) to screen out high - lipid - producing mutants. In addition, the study also evaluated the performance of these mutants in terms of genetic stability and compared the wild - type and mutants through molecular marker techniques (such as ISSR analysis). Finally, the researchers verified the quality and applicability of biodiesel produced from these strains through gas chromatography analysis and physical property tests. ### Research Background With the increase in energy demand and the limitation of fossil fuel resources, it is crucial to find cheap renewable resources. The research purpose of this paper is to increase the production of biodiesel by optimizing the fermentation conditions of **Penicillium commune NRC 2016**. The researchers used four mutagens (gamma rays, ethyl methanesulfonate (EMS), ethidium bromide (Et Br) and sodium azide (NaN3)) to increase the lipid production of **P. commune** NRC 2016 and compared the differences between the wild - type and mutants through ISSR molecular marker techniques. ### Main Methods 1. **Mutation Induction**: Use physical and chemical mutagens (gamma rays, EMS, Et Br and NaN3) to treat **P. commune** NRC 2016 and screen out mutants with high lipid production. 2. **Molecular Marking**: Use ISSR molecular marker techniques to analyze the genetic stability of the wild - type and mutants. 3. **Response Surface Method Optimization**: Optimize the fermentation conditions, including culture time, initial pH value, culture temperature, xylose concentration and peptone concentration, through the Response Surface Methodology (RSM) to maximize lipid production. 4. **Biodiesel Production and Analysis**: Evaluate the quality of biodiesel extracted from the wild - type and mutants through gas chromatography analysis and physical property tests. ### Main Results - **Lipid Production**: Under the optimal conditions optimized by RSM, the maximum lipid content of the wild - type **P. commune** NRC 2016 is 2.01 g/L, while the maximum lipid contents of the mutant strains **P. commune** NRC 2016 - 1, NRC 2016 - 2 and NRC 2016 - 3 are 2.55 g/L, 1.71 g/L and 2.27 g/L respectively. - **Genetic Stability**: The mutant strains showed stable lipid - producing ability in three consecutive generations of culture. - **Biodiesel Quality**: The main components of biodiesel extracted from the wild - type and mutants are C16 - C18 fatty acid methyl esters, and their physical properties (such as density, viscosity, cloud point, pour point and cetane number) meet the requirements of standard biodiesel and can be applied on a large scale. ### Conclusion This study successfully optimized the lipid production of **Penicillium commune** NRC 2016 through mutation techniques and the Response Surface Methodology, and improved the production efficiency of biodiesel. The research results show that these biodiesels have good physical properties and environmental friendliness and can be widely used as an eco - friendly product of low - cost carbon sources in actual production.

Response surface methodology for optimization of biodiesel production by the Penicillium commune NRC 2016 and its mutants

Response Surface Optimization of Biocatalytic Biodiesel Production with Acid Oil

Application of Response Surface Methodology (RSM) in the statistical evaluation of biodiesel production from the neutral lipids of the Coelastrella-Nannochloropsis consortium

Production of Biodiesel from Mixed Castor Seed and Microalgae Oils: Optimization of the Production and Fuel Quality Assessment

Optimization of microwave-assisted biodiesel production using response surface methodology

Optimization of biodiesel production process for mixed nonedible oil (processed dairy waste, mahua oil, and castor oil) using response surface methodology

Improvising Biodiesel Production from Scenedesmus dimorphus via Nutrient Starvation and Optimized Pretreatment Process

Mutation accumulation under UV radiation and chemical mutagen for meliorated biodiesel production using B. amyloliquefaciens (MF 510169)

Isolation, characterization and optimization of oleaginous Providencia vermicola as a feedstock for biodiesel production using Response Surface Methodology

Multi-response and multi-criteria decision-making optimization of transesterification reaction for biodiesel production based on critic weight determination method

A novel strategy for efficient biodiesel production: Optimization, prediction, and mechanism

Optimizing Algal Oil Extraction and Transesterification Parameters through RSM, PCA, and MRA for Sustainable Biodiesel Production

Response Surface Methodology and Artificial Neural Networks-Based Yield Optimization of Biodiesel Sourced from Mixture of Palm and Cotton Seed Oil

Enhancing the Biodiesel Production by Improving the Yield of Lipids in Wild Strain by Inducing Nitrogen Ion Mutation in Rhodotorula mucilaginosa

Modeling and global optimization of biodiesel synthesis using hybrid response surface methodology‐crow search algorithm: Case study of papaya seed waste oil utilization

Biodiesel Production from Citrillus colocynthis Oil Using Enzymatic Based Catalytic Reaction and Characterization Studies

Experimental assessment and optimization of the performance of a biodiesel engine using response surface methodology

Influence of multi-stress factors on the growth of Chlorella pyrenoidosa and Scenedesmus abundans using response surface methodology

Optimization of biodiesel yield from waste cooking oil and sesame oil using RSM and ANN techniques

Optimization of cavitation-assisted biodiesel production and fuel properties from Neochloris oleoabundans microalgae oil using genetic algorithm and response surface methodology

Optimization of microalgal biomass (Scenedesmus dimorphus) for maximized bioethanol production through response surface methodology (RSM)