Abstract:High-speed actuation of laser frequency1 is critical in applications using lasers and frequency combs2,3, and is a prerequisite for phase locking, frequency stabilization and stability transfer among optical carriers. For example, high-bandwidth feedback control of frequency combs is used in optical-frequency synthesis4, frequency division5 and optical clocks6. Soliton microcombs7,8 have emerged as chip-scale frequency comb sources, and have been used in system-level demonstrations9,10. Yet integrated microcombs using thermal heaters have limited actuation bandwidths11,12 of up to 10 kilohertz. Consequently, megahertz-bandwidth actuation and locking of microcombs have only been achieved with off-chip bulk component modulators. Here we demonstrate high-speed soliton microcomb actuation using integrated piezoelectric components13. By monolithically integrating AlN actuators14 on ultralow-loss Si3N4 photonic circuits15, we demonstrate voltage-controlled soliton initiation, tuning and stabilization with megahertz bandwidth. The AlN actuators use 300 nanowatts of power and feature bidirectional tuning, high linearity and low hysteresis. They exhibit a flat actuation response up to 1 megahertz-substantially exceeding bulk piezo tuning bandwidth-that is extendable to higher frequencies by overcoming coupling to acoustic contour modes of the chip. Via synchronous tuning of the laser and the microresonator, we exploit this ability to frequency-shift the optical comb spectrum (that is, to change the comb's carrier-envelope offset frequency) and make excursions beyond the soliton existence range. This enables a massively parallel frequency-modulated engine16,17 for lidar (light detection and ranging), with increased frequency excursion, lower power and elimination of channel distortions resulting from the soliton Raman self-frequency shift. Moreover, by modulating at a rate matching the frequency of high-overtone bulk acoustic resonances18, resonant build-up of bulk acoustic energy allows a 14-fold reduction of the required driving voltage, making it compatible with CMOS (complementary metal-oxide-semiconductor) electronics. Our approach endows soliton microcombs with integrated, ultralow-power and fast actuation, expanding the repertoire of technological applications of microcombs.

Directly pumped 10 GHz microcomb modules from low-power diode lasers

Integrated Turnkey Soliton Microcombs

Packaged photonic chip-based soliton microcomb using an ultralow-noise laser

Electrically pumped photonic integrated soliton microcomb

Gain-switched semiconductor laser driven soliton microcombs

Power-efficient soliton microcombs

Sub-milliwatt, widely-tunable coherent microcomb generation with feedback-free operation

Electrically empowered microcomb laser

Laser Soliton Microcombs Heterogeneously Integrated on Silicon

Laser soliton microcombs on silicon

Integrated Turnkey Soliton Microcombs Operated at CMOS Frequencies

Mechanically actuated Kerr soliton microcombs

Integrated and DC-powered superconducting microcomb

Synthetic-reflection self-injection-locked microcombs

Soliton Microcombs Multiplexing Using Intracavity-Stimulated Brillouin Lasers

Harnessing optical micro-combs for microwave photonics

Monolithic piezoelectric control of soliton microcombs

1550‐Nm Band Soliton Microcombs in Ytterbium‐Doped Lithium‐Niobate Microrings

Microcomb-driven Silicon Photonic Systems

Direct Kerr-frequency-comb atomic spectroscopy