Abstract:Metal organic framework (MOF) is a supramolecular coordination material composed of metal ions coordination, nodes, and organic ligands. MOFs were used as active materials for chemical capacitors to realize the high electrochemical performance, providing adequate redox sites and accelerating ion diffusion rate. Using MOF as a template to fabricate a novel platform can deliver large specific surface areas and abundant oxidation-active sites to augment electrical conductivity. The electrode material based on a MOF has a unique morphology that can significantly shorten charge transport paths to alleviate the electron transport and diffusion, thus strengthening the catalytic performance of the electrode materials. Also, the incorporation of vanadium in the intermediate leads to a broad impact on the morphology and the electrochemical energy storage of Cobalt-Trimesic matrix worked as a base for fabricating the composite. The DMF is a solvent to prepare the vanadium cobalt oxide composite derived using the MOF matrix. Trimesic acid is used as an initial organic linker precursor to initiate the formation of MOF of cobalt in DMF solvent. Then the vanadium ion is integrated into the same material matrix. In this study, the impact of organic system precursors and the integration of annealing play a pivotal role in alleviating the enhanced electrochemical storage response. After analyzing through XRD, the corresponding MOF crystal peaks are prominently affirmed. The high intensified peaks in the obtained patterns symbolize the oxide phase of cobalt vanadium and confirm the formation derived from MOF. The FTIR spectroscopy investigation depicted the proper presence of cobalt, vanadium, carbon, and nitrogen. The observed FESEM morphology illustrated the dissimilar structure and involved in the charge storage likewise. The morphology significantly impacts surface-dependent charge storage with having porosity introduced. High-temperature annealing also consists of the crystal orientation of the bi-metallic MOF matrix and creates porosity on the effective surface area. The Co-MOF-V oxide composite is thoroughly investigated individually in three-electrode arrangements for analyzing the electrochemical charge storage in 2MKOH represented in Fig.1 (c-d). Firstly, the oxide is scrutinized as working positive electrodes and measured in the potential window of -0.2 to 0.6 V w.r.t the saturated calomel reference electrode. The accomplished specific capacitance value from the cyclic voltammetry plot is 549 F/g at 2mV/s scan rate. Furthermore, the charge-discharge analysis of the composite delineated an admirable discharge time at 3mA/cm2 current density. It portrayed 349 F/g specific capacitance, leading to higher specific energy and specific power of 31.02Wh/kg and 159.53W/kg at the value of the same current density. The Nyquist plot corroborates that the electrode resistance, electrode-electrolyte interfacing resistance, and the value of diffuse layer resistance are significantly less. This study can bestow a greater pathway of ion transportation from the electrolyte to active electrode material that abetted to conversate superior storage using complete morphology. The transition metal possesses a variational oxidation state that directly contributes to this MOF composite's pseudocapacitive charge storage process. Alternatively, comparable analysis is directed over anode material that is lignocellulose derived activated porous carbon. It is depicted in Fig.1(e-f) in the potential window of -1 to 0v w.r.t the Ag/AgCl electrode in 2M KOH. The gained specific capacitance from the cyclic voltammetry analysis is 426 F/g at a 2mV/s scan rate. Besides, the charge-discharge study of the same carbon depicted admirable discharge time at 0.5A/g current density and portrayed 565 F/g specific capacitance. The specific energy and power of 78.47Wh/kg and 282W/kg at the same current density. Also, the integrated porous system with the high active surface area, which significantly comes from the MOF matrix, provides an added phase to strengthen the amount of storage like EDLC formation. Furthermore, combining both of those active materials, the asymmetric supercapacitor storage is made up [Fig.1 (g-h)]. That system works upon 0 to 1.4V windows. The attained areal capacitance is 0.54 F/cm 2, and volumetric capacitance is 0.68 F/cm 3 in the current density of 4mA/cm 2 . The Ragone plot shows its perfect positioning in the region of asymmetric storage. This ASC system delineated coulombic efficiency 79% of capacitive retention 75% after the 10,000 long cycle stability study. From the electrochemical impedance spectroscopy analysis, the obtained interfacing and electrode resistance diffuse layer resistance is found significantly lesser and upwards. Figure 1

Improved electrochemical performances of cobalt molybdate electrode using Gd3+ dopant and redox additive electrolyte: a simple synthesis platform

Synthesis of transition metal oxide-based nanocomposite as a robust electrode with a simple approach for supercabattery application

Simple synthesis and supercapacitor characterization of cobalt molybdate/graphene oxide nanopowders

Unveiling the Dynamic Capacitive Storage Mechanism of Co3O4 @nico2o4 Hybrid Nanoelectrodes for Supercapacitor Applications

Mo-doped porous Co 3 O 4 nanoflakes as an electrode with the enhanced capacitive contribution for asymmetric supercapacitor application

Enhancing the electrochemical performance of nickel cobalt sulfide nanostructures via molybdenum doping for supercapacitor applications

Boosted electrochemical properties of Co 3 O 4 nanoflakes by the addition of a redox-additive electrolyte

Mn-substituted NiCo 2 O 4 /rGO composite electrode for supercapacitors and their electrochemical performance boost by redox additive in alkaline electrolyte

Enhancement of energy storage performance of supercapacitors based on MoS2-g-C3N4 Nanocomposite electrodes

Rare Earth metal oxide nanoparticle-infused polymer nanocomposites for enhanced supercapacitor electrodes

Controllable synthesis of CoMoO4-modified NiMoO4: a stepwise chemical etching method of materials for hybrid supercapacitors

Facile Solid-State Chemical Synthesis of CoMoO4 Nanorods for High-Performance Supercapacitors

Molybdenum and Sulfur Co-Doped CoNiO2 with Tremella-Like Nano-Structures As Electrode Material for High-Performance Supercapacitors

Interface engineering of N, P and S-doped hollow/porous Co3O4@Co3V2O8 heterostructure nanocube for high-activity supercapacitor and oxygen evolution reaction

Activating the Highly Reversible Mo 4+ /Mo 5+ Redox Couple in Amorphous Molybdenum Oxide for High-Performance Supercapacitors

Designing the redox activity of CuMoO 4 electrodes on N-rich reduced graphene oxide nanocomposite for high performance supercapacitor

Synthesis and characterization of cobalt molybdate dihydrate nanorods arrays for supercapacitor electrode application

Boosting the Electrochemical Storage Properties of Co3O4 Nanowires by the Mn Doping Strategy with Appropriate Mn Doping Concentrations

Approaching high performance Ni(Co) molybdate electrode materials for flexible hybrid devices

Boosting specific capacitance of Mo-Co-(S,O) electrode via a synergistic optimization strategy

(Digital Presentation) Vanadium Intercalated Cobalt Trimesic MOF Composite for Enhanced Solid-State Asymmetric Supercapacitor Storage