Abstract:The effect of water management on oxygen transport plays a critical role in the design of high-performance polymer electrolyte fuel cells (PEFCs) for the automotive industry, especially at low cathode platinum loading [1,2]. In this regard, optimizing the hierarchical pore structure of the membrane electrode assembly (MEA) is crucial to alleviate cathode flooding while ensuring good membrane hydration [3]. However, this task is complicated due to the small dimensions involved in the problem. Mathematical modeling has turned out to be a key tool to understand transport in the thin layered assembly used in PEFCs, including the catalyst layer (CL), microporous layer (MPL) and gas diffusion layer (GDL). In this work, oxygen, heat and two-phase water transport in the MEA are examined by means of a 1-dimension continuum bundle of capillary tubes model. Experimental pore size distributions (PSDs) are considered for the GDL/MPL/CL assembly. The model takes especial care in analyzing thermal and water behavior in catalyst layer by considering micro ( 300 nm) structures as different interconnected domains, each with their own effective thermal conductivity and water saturation. In this aspect, taking into account pore hydrophilicity or hydrophobicity is determinant as water behavior is extremely different. The model predictions are validated against previous experimental data for various operating conditions and pore structures (Figure 1a). The results offer precise information on the coupling between heat and water transport in both liquid and gas phases, and the impact of operating conditions and transport properties on the saturation distribution through the MEA layers (Figure 1b). Then the continuum bundle of capillary tubes model is also used to run a parametric analysis centered on the obtention of optimal PSD-dependent effective transport properties to produce improved MEA microstructures. [1] A. Sánchez-Ramos, J.T. Gostick, P.A. García-Salaberri, Modeling the Effect of Low Pt loading Cathode Catalyst Layer in Polymer Electrolyte Fuel Cells: Part I. Model Formulation and Validation, Journal of the Electrochemical Society 168 (2021) 124514. [2] A. Sánchez-Ramos, J.T. Gostick, P.A. García-Salaberri, Modeling the Effect of Low Pt loading Cathode Catalyst Layer in Polymer Electrolyte Fuel Cells: Part II. Parametric Analysis, Journal of the Electrochemical Society 169 (2022) 074503. [3] M. Gomaa, A. Sánchez-Ramos, N. Ureña, M.T. Pérez-Prior, B. Levenfeld, P.A. García-Salaberri, M. Rabeh, Characterization and modelling of free volume and ionic conduction in copolymer proton exchange membranes, Polymers 14(9) (2022) 1688. Figure 1

Dynamic Modeling of Polymer Electrolyte Membrane Fuel Cells Under Real-World Automotive Driving Cycle with Experimental Validation on Segmented Single Cell

Dynamic transport characteristics and performance response of commercial-size polymer electrolyte membrane fuel cell stack: An experimental study

Computational Fluid Dynamic Investigation of Local Flow-Field Conditions in Lab Polymer Electrolyte Membrane Fuel Cells to Identify Degradation Stressors and Performance Enhancers

Experimental and Modeling Analyses of the Correlation between Local 3D Heterogeneities and the Macroscopic Observers of a Proton Exchange Membrane Fuel Cell Stack

Modeling of Catalyst Degradation in Polymer Electrolyte Membrane Fuel Cells Applied to Three‐Dimensional Computational Fluid Dynamics Simulation

Large-scale Simulation of Polymer Electrolyte Fuel Cells by Parallel Computing

Simulation of the Dynamic Characteristics of a PEMFC System in Fluctuating Operating Conditions

A Multi-Field Coupled PEMFC Model with Force-Temperature-Humidity and Experimental Validation for High Electrochemical Performance Design

Dynamic Modeling of Pt Degradation and Mitigation Strategies in Polymer Electrolyte Membrane Fuel Cells

Modelling of a high-temperature polymer electrolyte membrane fuel cell integrated with a methanol steam reformer cell

A Method to Study the Intake Consistency of the Dual-Stack Polymer Electrolyte Membrane Fuel Cell System under Dynamic Operating Conditions

Advanced Methodology for Simulating Local Operating Conditions in Large Fuel Cells Based on a Spatially Averaged Pseudo-3D Model

(Digital Presentation) Modeling the Effect of Membrane Electrode Assembly Microstructure on Thermal and Water Transport in Polymer Electrolyte Fuel Cells

A 1 + 1-D Multiphase Proton Exchange Membrane Fuel Cell Model for Real-Time Simulation

Transient Computation Fluid Dynamics Modeling of A Single Proton Exchange Membrane Fuel Cell with Serpentine Channel

Cross flow and distribution characteristics in automobile polymer electrolyte membrane fuel cells: A three-dimensional full-scale modeling study

Multiscale Modeling of the Membrane Electrode Assembly in Polymer Electrolyte Fuel Cells: Interaction of Pore Size and Wettability of Porous Layers

Performance evaluation on full-scale proton exchange membrane fuel cell: Mutual validation of one-dimensional, three-dimensional and experimental investigations

Transport Phenomena in a Banded Solid Oxide Fuel Cell Stack—Part 1: Model and Validation

A Numerical Model of a Liquid-Feed Solid Polymer Electrolyte DMFC and Its Experimental Validation

Mesoscopic modeling of two-phase behavior and flooding phenomena in polymer electrolyte fuel cells