Abstract:Sn‐doping is proposed to design a biphasic structure, (Ag, Sn)2S0.7Se0.3 as the main phase and Ag2S0.7Se0.3 as the interstitial phase, realizing a ZT of 0.42 at 343 K with >90% ductility preserved. The main phase enhances carrier concentration, while interfaces restrain carrier scattering for high mobility. Micro/nanodefects induced by the biphasic structure effectively scatter phonons, leading to low thermal conductivity. Due to its inherent ductility, Ag2S shows promise as a flexible thermoelectric material for harnessing waste heat from diverse sources. However, its thermoelectric performance remains subpar, and existing enhancement strategies often compromise its ductility. In this study, a novel Sn‐doping‐induced biphasic structuring approach is introduced to synergistically control electron and phonon transport. Specifically, Sn‐doping is incorporated into Ag2S0.7Se0.3 to form a biphasic composition comprising (Ag, Sn)2S0.7Se0.3 as the primary phase and Ag2S0.7Se0.3 as the secondary phase. This biphasic configuration achieves a competitive figure‐of‐merit ZT of 0.42 at 343 K while retaining exceptional ductility, exceeding 90%. The dominant (Ag, Sn)2S0.7Se0.3 phase bolsters the initially low carrier concentration, with interfacial boundaries between the phases effectively mitigating carrier scattering and promoting carrier mobility. Consequently, the optimized power factor reaches 5 μW cm−1 K−2 at 343 K. Additionally, the formation of the biphasic structure induces diverse micro/nano defects, suppressing lattice thermal conductivity to a commendable 0.18 W m−1 K−1, thereby achieving optimized thermoelectric performance. As a result, a four‐leg in‐plane flexible thermoelectric device is fabricated, exhibiting a maximum power density of ≈49 μW cm−2 under the temperature difference of 30 K, much higher than that of organic‐based flexible thermoelectric devices.

Enhanced thermoelectric performance in ductile Ag 2 S-based materials via doping iodine

Optimized Thermoelectric Performance and Plasticity of Ductile Semiconductor Ag2S0.5Se0.5 Via Dual‐Phase Engineering

Enhancement of Thermoelectric Performance of Layered SnSe2 by Synergistic Modulation of Carrier Concentration and Suppression of Lattice Thermal Conductivity

Optimized Thermoelectric Properties of Sulfide Compound Bi2SeS2 by Iodine Doping

Sn‐Doping‐Induced Biphasic Structure Advances Ductile Ag2S‐Based Thermoelectrics

Modulated Fermi Level and Relaxed Lattice Strain Leading to Enhanced Thermoelectric Properties in AgSbSe 2

Enhanced thermoelectric properties of p-type SnS0.2Se0.8 solid solution doped with Ag

Α-Ag2s: A Ductile Thermoelectric Material with High ZT.

Crystalline Structure-Dependent Mechanical and Thermoelectric Performance in A g 2 S e 1 ‐ x S x System

Modulation of the morphotropic phase boundary for high-performance ductile thermoelectric materials

Significant enhancement of the thermoelectric properties for MnSb2Se4 through Ag doping

Achieving Metal-Like Malleability and Ductility in Ag2Te1-xSx Inorganic Thermoelectric Semiconductors with High Mobility

Stabilizing Distorted Ductile Semiconductors for Excellent Ductility and Thermoelectric Performance

AgSbSe2 inclusions enabling high thermoelectric and mechanical performance in n-type Ag2Se-based composites

Thermoelectric performance improvement of p-type Mg3Sb2-based materials by Zn and Ag co-doping

Fabrication of Metal Sulfide Ag2S via Zone Melting Method and Evaluation of Its Thermoelectric Property

Suppressed phase transition and enhanced thermoelectric performance in iodine-doped AgCuTe

Electrical property enhancement and lattice thermal conductivity reduction of n-type Mg3Sb1.5Bi0.5-based Zintl compound by In&Se co-doping

Liquid-Phase Manipulation Securing Enhanced Thermoelectric Performance of Ag 2 Se

Metal Sulfide Ag2S: Fabrication via Zone Melting Method and Its Thermoelectric Property

High Thermoelectric Performance of AgSb1-xPbxSe2 Prepared by Fast Non-Equilibrium Synthesis.