Abstract:In this work, N-doped activated carbon supported metallic nickel (Ni/NAC) catalysts were fabricated by two-step calcination method in N-2 atmosphere for liquid-phase hydrogenation of furfural (FAL). It was found that the pyrolysis temperature and amount of melamine as N doping source have important influence on N doping content and type in activated carbon (AC) support, resulting in the subsequently formed Ni nanoparticles on N-doped AC with different sizes and thus affording different catalytic hydrogenation activities. The results demonstrated that using N-doped AC with 1.0 g melamine at 1073 K in N-2 atmosphere as support, the obtained Ni/NAC at 873 K in N-2 atmosphere with Ni nanoparticle sizes of similar to 13.1 nm (denoted as Ni/NAC-1-1073) exhibits a N doping content of 3.65 at.% and a surface area of 561.2 m(2) g(-1) with a microporous structure. As catalyst for FAL hydrogenation, Ni/NAC-1-1073 demonstrated the best catalytic performance among all investigated catalysts, achieving almost 100% selectivity of tetrahydrofurfuryl alcohol (THFOL) with a complete FAL conversion at 353 K after 3 h reaction, while only 76.7% selectivity of THFOL with a FAL conversion of 86.4% was obtained using Ni/AC catalyst without N doping under the identical experimental conditions. Furthermore, it was found that almost 100% conversion of FAL to furfural alcohol (FOL) can be reached by transfer hydrogenation pathway in 2-proponal solvent using Ni/NAC-1-1073 at 413 K after 5 h reaction, whereas Ni/AC without N doping can only afford 30.2% conversion of FAL to FOL under the same conditions. The superior catalytic performance of Ni/NAC-11073 could be ascribed to a synergistic effect of nanosized Ni providing catalytic active sites, suitable N doping content and type in AC to promote catalytic performance, and advantageous structure characteristics of high surface area and porous structure favourable for the exposure of catalytic active sites and mass transport. (C) 2016 Elsevier B.V. All rights reserved.

Controlled hydrogenation of furfural to furfuryl alcohol or cyclopentanone over Ni–P under mild conditions

Catalytic Transfer Hydrogenation of Furfural to Furfuryl Alcohol by Cu-Pd/Al2O3 in Near-Critical Isopropanol

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Highly selective hydrogenative ring-rearrangement of furfural to cyclopentanone over a bifunctional Ni3P/γ-Al2O3 catalyst

Cu−Ni Bimetallic Hydroxide Catalyst for Efficient Electrochemical Conversion of 5‐hydroxymethylfurfural to 2,5‐furandicarboxylic Acid

Selective Hydrogenation of Furfural over Supported Nickel and Nickel Phosphide Catalysts

Development of Robust CuNi Bimetallic Catalysts for Selective Hydrogenation of Furfural to Furfuryl Alcohol under Mild Conditions

Nitrogen-doped carbon nanotubes-supported PdNiCo nanoparticles as a highly efficient catalyst for selective hydrogenation of furfural

Highly efficient and selective hydrogenation of furfural to furfuryl alcohol and cyclopentanone over Cu-Ni bimetallic Catalysts: The crucial role of CuNi alloys and Cu + species

Synergetic effects of hydrogenation and acidic sites in phosphorus-modified nickel catalysts for the selective conversion of furfural to cyclopentanone

Theoretical study on the hydrogenation of furfural for furfuryl alcohol production over low Ni modified Cu catalysts

Alloying Nickel with Phosphorus to Switch the Selective Conversion of Furfural from Furans to Cyclopentanones or 1,4-Pentanediol

A highly efficient, selective and stable PtCoNi/MWCNTs nanocatalyst for furfural hydrogenation to furfuryl alcohol under mild reaction conditions

Selective hydrogenation of furfural and its derivative over bimetallic NiFe-based catalysts: Understanding the synergy between Ni sites and Ni–Fe alloy

Selective conversion of furfural to cyclopentanone over the N-doped CuNi alloy carbon materials derived from porphyrin-based bimetallic metal-organic frameworks

Highly Efficient and Selective Hydrogenation of Biomass-Derived Furfural Using Interface-Active Rice Husk-Based Porous Carbon-Supported NiCu Alloy Catalysts

Trimetallic NiZr/CoOx catalyst for the selective hydrogenation of furfural into furfuryl alcohol

Selective Hydrogenation of Furfural over Pt Based and Pd Based Bimetallic Catalysts Supported on Modified Multiwalled Carbon Nanotubes (MWNT)

Facilitating Selective Conversion of Furfural to Cyclopentanone Via Reducing Availability of Metallic Nickel Sites

Highly Selective Liquid-Phase Hydrogenation of Furfural over N-Doped Carbon Supported Metallic Nickel Catalyst under Mild Conditions

Facile synthesis of N, P co-doped carbon encapsulated Ni catalyst for green production of cyclopentanone from biomass derivative furfural